Whirlpool Washer Water-level pressure switch WP3362987, Replaces 3362987

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Washer overflows or continues filling after reaching the intended water level.
• Washer underfills or does not fill properly.
• Washer may stop during the cycle when the control does not receive the expected water-level signal.
• Fill-related or long-fill behavior may occur when the pressure-switch circuit does not respond correctly.

Check Before Replacing

• Disconnect power before servicing and shut off the washer water supply.
• Inspect the pressure hose and its connections for kinks, pinching, leaks, water, suds, or debris.
• Verify the pressure hose is correctly routed and firmly connected to the switch and tub pressure dome.
• With power disconnected, inspect the switch harness and connector for looseness or visible damage.
• If qualified to use a multimeter, perform the manufacturer-specified continuity checks at the switch terminals while applying only the specified light air pressure; do not rely on a symptom alone to condemn the switch.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the washer water supply before installation.
• Protect hands with work gloves when accessing and removing the component.
• Reconnect the pressure hose and electrical harness securely and restore the hose routing so it is not kinked or pinched.
• Reinstall all removed panels and verify operation only after the appliance is fully reassembled.

Verified Compatible Models

110.80754000, 110.80754004, 110.98573130, 110.98575120, 110.98752793, LTE5243BW2, LTE5243DQ8, LTE5243DT7, LTE5243DZ2, LTG5243DQ1, LTG5243DQ4, LTG5243DT3, LTG5243DT4, LTG5243DT5, YLTE5243DQ5

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.