WP3403607 Dryer Thermal Fuse

Whirlpool Dryer Thermal limiter / thermal cutoff, 91°C (196°F) WP3403607, Replaces 3403607, 3391927

XPart Number XP10007425
Sale price
$35
Regular price
$40
In stock and ready for shipping
Buying Options: OEM Genuine

Choose an available buying option.

Check Fit & Find Parts
Bubba checks verified models, product descriptions, cross-references and store data. Find your model number →

Frequently Bought Together

DRYER RUNS BUT DOES NOT PRODUCE HEAT

Whirlpool Dryer Thermal limiter / thermal cutoff, 91°C (196°F) WP3403607, Fixes Dryer runs but does not produce heat

Whirlpool OEM non-resettable thermal limiter/thermal cutoff used in dryers and laundry centers. The component interrupts power to the heating element or burner if overheating occurs. It uses 1/4-inch terminals and is rated approximately 91°C (196°F).

Part WP3403607Replaces 3403607, 3391927Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.

Is This the Right Part?

Part NumberWP3403607
Replaces3403607, 3391927
ManufacturerWhirlpool
Appliance TypeDryer
Part TypeThermal limiter / thermal cutoff, 91°C (196°F)

✅ Cross Reference Information

Current Part NumberWP3403607
Replaces3403607, 3391927

Common Symptoms

  • Dryer may not start if the cutoff is open in the applicable circuit.
  • Dryer may stop heating or shut down after operating for a period of time.
  • Repeated cutoff failure may be associated with restricted dryer venting or overheating elsewhere in the appliance.

Check Before Replacing

  • Disconnect electrical power before inspection or testing.
  • Inspect the cutoff and its terminals for visible damage, loose connections, or heat discoloration.
  • With power disconnected and the component isolated as required by the appliance service procedure, check continuity with a multimeter; an open reading indicates the cutoff is not conducting, but does not by itself identify the cause of the overheat condition.
  • Check and clean the dryer venting and exhaust path before replacing a failed cutoff.
  • Verify the replacement cutoff matches WP3403607 and the appliance service documentation; do not bypass the safety device.

Pro Tip

If this cutoff is open or fails repeatedly, check for restricted venting and other overheating causes rather than replacing the cutoff alone.

Part Details

Part NumberWP3403607
Part TypeThermal limiter / thermal cutoff, 91°C (196°F)
ManufacturerWhirlpool
Appliance TypeDryer
Primary FunctionNon-resettable overheat safety device that interrupts power to the dryer heating circuit when excessive temperature is detected.

Installation Notes

  • Disconnect the dryer from electrical power before installation.
  • Access and mounting location can vary by dryer or laundry-center design; follow the appliance-specific service instructions.
  • Match the wire connections and terminal locations to the original installation, and do not bypass or substitute the thermal cutoff with a non-equivalent device.
  • After installation, inspect the venting and exhaust path for restriction before returning the appliance to service.

Verified Compatible Models

1DNET3205TQ0, 3RLEC8600SL1, 3RLEC8600SL2, 7MLTG8234PQ1, BYCWD6274W0, BYCWD6274W1, BYCWD6274W2, BYCWD6274W3, BYCWD6274W4, LER3622PQ1, LTE5243DQ4, LTE5243DT4, LTE6234DQ1, LTE6234DQ2, LTE6234DQ3

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions