OVEN DOES NOT HEAT PROPERLY DURING BAKE
Whirlpool Range Bake element, 2500 W WP9750213, Fixes Oven does not heat properly during bake
OEM lower oven bake heating element for electric ranges. Documented specifications include approximately 2,500 watts and 240 volts. The element supplies heat during the bake cycle.
Part WP9750213Replaces 9750213, 9750213AWhirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWP9750213
Replaces9750213, 9750213A
ManufacturerWhirlpool
Appliance TypeRange
Part TypeBake element, 2500 W
✅ Cross Reference Information
Current Part NumberWP9750213
Verified Previous OEM Numbers9750213, 9750213A
Common Symptoms
- Bake preheating is unusually slow.
- Baking is uneven or food remains undercooked on the bottom.
- The element has a visible blister, crack, burn mark, or break.
- The element heats only partially or does not glow during bake.
- The oven may produce popping or sparking near the element if it is physically damaged.
Check Before Replacing
- With power disconnected, visually inspect the bake element for cracks, blisters, burn marks, or a visible break in the sheath.
- If appropriate for the appliance and service procedure, check the disconnected element for electrical continuity with a suitable meter; an open circuit is abnormal for a heating element, but follow the appliance service guidance and do not rely on this check alone.
- Confirm that the range has electrical power and that other oven functions operate before attributing a bake problem to this element.
- Inspect the element terminals and wire connectors for looseness, heat damage, or corrosion without pulling on the wires.
Pro Tip
A bake element can appear to heat yet still be weak or intermittent; compare its heating across the full element and also consider the temperature sensor, control, and supply voltage before replacing parts.
Part Details
Part NumberWP9750213
Part TypeBake element, 2500 W
ManufacturerWhirlpool
Appliance TypeRange
Primary FunctionSupplies approximately 2,500 watts of heat from the lower oven area during the bake cycle in compatible electric ranges.
Installation Notes
- Disconnect electrical power at the range circuit breaker or unplug the appliance before servicing.
- Remove the oven racks to provide access to the element.
- Remove the retaining screws, pull the element forward only far enough to access the connectors, and disconnect the wires carefully.
- Prevent the wires from falling back into the oven wall while the element is disconnected.
- Connect the wires to the replacement element, return it to position, reinstall the retaining screws, and restore power only after reassembly.
Verified Compatible Models
GR450LXHB0, GR450LXHB2, GR450LXHQ0, GR450LXHQ2, GR450LXLB0, GR450LXLQ0, GR450LXLS0, GR450LXLT0, GY395LXGB0, GY395LXGB1, GY395LXGB2, GY395LXGB3, GY395LXGB4, GY395LXGQ0, GY395LXGQ1
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
