Whirlpool Range Triple-circuit infinite switch / surface element control switch WPW10296657, Replaces W10296657

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Surface element will not heat or turn on.
• Triple-circuit burner does not operate on one or more heat settings.
• Surface element may remain cold even though the control is set to heat.

Check Before Replacing

• With the range disconnected from power, inspect the switch terminals and wiring for loose, overheated, or visibly damaged connections.
• Confirm the control knob is properly seated and turns the switch through its full operating range.
• If qualified to perform appliance electrical testing, check switch continuity according to the appliance service documentation; do not test live voltage unless trained and equipped to do so.
• Because a failed element, receptacle, wiring, or switch can produce similar symptoms, check the element and its connections before concluding that the switch is defective.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power to the range at the plug or circuit breaker before servicing.
• Record wire colors and terminal numbers before removing the old switch because terminal locations on the replacement may differ.
• Reconnect wiring to the corresponding terminals and replace all panels and parts before restoring power.
• Follow the Whirlpool infinite-switch instruction sheet for any jumper-wire requirement applicable to the supplied switch configuration.

Verified Compatible Models

KERS505XBL00, KERS505XBL01, KERS505XBL02, KERS505XBL03, KERS505XBL05, KERS505XSS00, KERS505XSS01, KERS505XSS02, KERS505XSS03, KERS505XSS05, KERS505XWH00, KERS505XWH01, KERS505XWH02, KERS505XWH03, KERS505XWH05

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.