Whirlpool Range oven door hinge with spring WPW10299224, Replaces W10299224

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Door sticks or closes unevenly.
• Door drops, closes too quickly, or does not stay open at an angle.
• Door sits out of alignment or leaves an uneven gap when closed.
• Visible hinge bending, spring damage, or abnormal resistance during door movement.

Check Before Replacing

• With the range cool and power disconnected, visually inspect the hinge for bending, distortion, or a damaged spring.
• Check whether the oven door sits evenly in the frame and whether the gap is noticeably uneven from side to side.
• Slowly move the door through its normal travel and compare resistance and movement on the hinge sides; stop if binding or unusual force is present.
• Confirm that the hinge is installed on the correct side and that the door is fully seated before concluding the hinge is defective.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power to the range and allow the oven to cool before service.
• Support and remove the oven door according to the appliance’s model-specific instructions before accessing the hinge.
• Record the original hinge orientation and position before removal.
• Install the replacement hinge in the same orientation and verify that it is securely seated before reinstalling the door.
• After installation, operate the door slowly to confirm smooth movement, proper alignment, and complete closure before restoring power.

Verified Compatible Models

AER6603SFB1, WFE510S0HB0, WFE510S0HS1, WFE515S0ED1, WFE525S0JS1, WFE525S0JV1, WFE525S0JZ0, WFE550S0HV1, WFG525S0JV5, YMER6600FZ3, YMER7651WB2, YMER7660WS2, YWFE510S0HW0, YWFE515S0JS0, YWFE521S0HS0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.