DISHWASHER LEAVES STANDING WATER AFTER THE CYCLE
Bosch Pump-drain 9-vane, 120V / Dishwasher drain pump assembly 00167082, Fixes Dishwasher leaves standing water after the cycle
Bosch 9-vane, 120V dishwasher drain pump. Bosch states that the 4-vane pump is part 184178 and identifies 642239 as the replacement pump, used with connector 623143.
Part 00167082Replaces 167082Bosch
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number00167082
Replaces167082
ManufacturerBosch
Appliance TypeDishwasher
Part TypePump-drain 9-vane, 120V / Dishwasher drain pump assembly
✅ Cross Reference Information
Current Part Number00167082
Replaces167082
Common Symptoms
- Poor or incomplete draining
- Humming or abnormal noise during the drain phase
- Drain-related error condition when the pump is blocked or faulty
- Possible leakage if the pump housing is damaged
Check Before Replacing
- Switch off power to the dishwasher before inspection.
- Remove the filter and inspect the pump-cover area for loose debris or standing water.
- Confirm the drain-pump cover is properly seated and latched.
- Inspect the drain hose, air gap, and connected drain path for kinks or blockages.
- If qualified to perform electrical testing, check pump-motor continuity according to the appliance service documentation; do not assume a no-drain condition proves pump failure.
Pro Tip
Before replacing the pump, clean the filter and pump area and verify that the pump cover is fully seated; Bosch identifies blockages, a loose pump cover, and restricted drain hoses as possible causes of drain problems.
Part Details
Part Number00167082
Part TypePump-drain 9-vane, 120V / Dishwasher drain pump assembly
ManufacturerBosch
Appliance TypeDishwasher
Primary FunctionRemoves wastewater from the dishwasher tub during the drain phase by pumping it through the drain hose.
Installation Notes
- Disconnect electrical power before servicing.
- Remove standing water and loose debris from the pump area before removing or installing the assembly.
- Use the appliance-specific service instructions for pump access and hose/wiring disconnection; installation access varies by dishwasher model.
- If replacing 00167082 with Bosch 642239, verify whether connector 623143 is required for the specific appliance.
- After installation, ensure the pump cover and related connections are fully secured before testing for leaks and proper draining.
Verified Compatible Models
63016302401, 63016302402, 63016302403, 63016303401, 63016303403, 63016304401, 63016304402, 63016309400, S35KMK17UC-40, SHU9915UC/11, SHX46A05UC/40, SHX55M06UC/46, DW246US(FD7711-7912), SHU5304UC/06 (FD 7705-7912), SHU9906UC/06 (FD 7905-8002)
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
