Bosch Dishwasher Not Draining? 00611332 Drain Pump — Fix Standing Water Fast

When your Bosch dishwasher finishes a cycle but leaves standing water in the bottom, a failed drain pump is the most common cause. In SHE3AR72, SHE3AR75, SHE3AR76, and SHE3ARF2 series dishwashers, the drain pump forces water out through the drain hose at the end of every cycle. When the pump motor fails, water has nowhere to go and pools at the bottom of the tub. ⚡ Common failure point in Bosch 300-series dishwashers. Part 00611332 is the genuine OEM replacement — superseding 611332 — and restores full drainage in under 45 minutes.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Dishwasher powers on and runs through the wash cycle normally
• ✔ Water sprays and heating functions appear to work
• ✔ Drain hose is not kinked or clogged at the sink connection
• ✔ Filter and sump area have been cleaned and are not blocked
• ✔ ONLY problem is standing water remaining after the cycle ends

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Standing water in the bottom of the dishwasher after cycle — most common complaint
• Dishwasher stops mid-cycle and displays E24 or E25 error code
• Drain cycle runs but water level doesn’t drop
• Humming or buzzing sound during drain phase with no water movement
• Dishes come out wet and dirty — cycle not completing properly
• Water backing up into the sink or garbage disposal connection

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing the drain pump restores full drainage immediately.

📦 Part Details

• Part Number: 00611332
• Type: Drain pump motor assembly — dishwasher sump, Bosch OEM
• Replaces: OEM direct-fit assembly — supersedes 611332 (no modification required)
• Brands: Bosch

⚙️ Installation Notes

Skill Level: MODERATE — 30–45 minutes. Disconnect power before beginning any repair. The drain pump is accessed from inside the dishwasher tub — remove the lower spray arm, filter assembly, and sump cover to reach the pump housing. Twist the pump counterclockwise to unlock and lift out; reverse to install the new unit. Have towels ready for residual water in the sump. No special tools required.

💡 Pro Tip

Model hub pages: SHE3AR72UC/22, SHE3AR72UC/24, SHE3AR72UC/25, SHE3AR75UC/22, SHE3AR75UC/23, SHE3AR75UC/24, SHE3AR75UC/25, SHE3AR76UC/22, SHE3AR76UC/24, SHE3AR76UC/25, SHE3AR76UC/26, SHE3ARF2UC