Bosch / BSH Dryer Drum bearing complete with E-clip 00618931, Replaces 00616614, 00613461, 00606389, 00605022, 00600428, 00491607

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Squealing, grinding, rumbling, or rubbing noise from the rear of the dryer
• Drum feels stiff or difficult to turn by hand
• Drum may fail to tumble if the bearing is seized
• Vibration or shaking associated with worn drum support components

Check Before Replacing

• Disconnect electrical power before inspection.
• With the dryer de-energized, rotate the drum by hand and listen for squealing, grinding, rumbling, or rubbing from the rear bearing area.
• If the model’s service procedure permits belt removal, rotate the drum again without the belt; a stiff or noisy drum supports inspection of the rear bearing, but does not by itself prove the bearing is defective.
• During authorized disassembly, visually check the bearing assembly, shaft contact area, and E-clip for wear, damage, looseness, or displacement.

Pro Tip

Part Details

Installation Notes

• Disconnect power before installing or servicing the dryer.
• Follow the model-specific service procedure because cabinet access and bearing replacement steps vary by dryer design.
• Support the drum before removing the rear bearing assembly so the drum does not drop or shift unexpectedly.
• Ensure the replacement bearing is fully seated and the E-clip is correctly engaged before reassembly.
• After reassembly, confirm that the drum rotates freely by hand before restoring normal operation.

Verified Compatible Models

WTG865H2UC/01, WTG865H2UC/02, WTG865H3UC/02, WTG865H4UC/01, WTG86400UC/01, WTG86400UC/02, WTG86400UC/07, WTG86400UC/08, WTG86401UC/01, WTG86401UC/07, WTG86401UC/08, WTG86402UC/02, WTG86402UC/08, WTG86403UC/01, WTW87NH1UC/01

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.