DISHWASHER DOES NOT FILL OR ONLY FILLS SLOWLY
Bosch Inlet valve / dishwasher water inlet valve 00622058, Fixes Dishwasher does not fill or only fills slowly
Genuine Bosch inlet valve for timed-fill dishwashers with RAST 5 terminals. The valve controls water flow into the dishwasher during the fill cycle; failure can cause the dishwasher not to fill or to underfill.
Part 00622058Replaces 622058Bosch
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number00622058
Replaces622058
ManufacturerBosch
Appliance TypeDishwasher
Part TypeInlet valve / dishwasher water inlet valve
✅ Cross Reference Information
Current Part Number00622058
Replaces622058
Common Symptoms
- Little or no water entering during the fill portion of a cycle
- Dishwasher underfills and dishes are not cleaned properly
- Water continues entering or the valve leaks when it should be closed
- Visible leaking around the inlet-valve or supply-line connection
Check Before Replacing
- Confirm the dishwasher water shutoff valve is fully open.
- Inspect the accessible water-supply line for kinks or restrictions.
- With power and water safely disconnected, inspect the valve, hose connection, and electrical connector for visible cracks, corrosion, looseness, or water damage.
- If the dishwasher is leaking, dry the area, restore water only while observing safely for renewed leakage, and verify the leak location before condemning the valve.
- A qualified technician may test the valve circuit with power disconnected; an open circuit or failed electrical connection does not by itself prove that the valve is the only fault.
Pro Tip
Before replacing the valve, verify that the household water supply is open and that the supply line is not kinked; after installation, restore water gradually and check every connection for leaks before running a complete cycle.
Part Details
Part Number00622058
Part TypeInlet valve / dishwasher water inlet valve
ManufacturerBosch
Appliance TypeDishwasher
Primary FunctionControls water flow into the dishwasher during the timed fill cycle באמצעות a solenoid-operated inlet valve.
Installation Notes
- Disconnect electrical power and shut off the dishwasher water supply before service.
- Access and remove the old valve according to the dishwasher model’s service instructions; model-specific access can vary.
- Transfer or install the water connection using the correct seal and fitting for the appliance. Do not overtighten or place force on the plastic valve body.
- Reconnect the internal water hose and electrical connector securely, then remount the valve in its existing bracket or mounting position.
- Turn on the water supply gradually and check the valve and supply connections for leaks before restoring power and testing the dishwasher.
Verified Compatible Models
SHE3AR52UC/06, SHE3AR52UC/07, SHE3AR55UC/06, SHE3AR55UC/07, SHE3AR56UC/06, SHX3AR55UC/08, SHX3AR56UC/07, SHX3AR56UC/08, SHX3AR56UC/10, SHX3AR56UC/12, SHX3AR56UC/13, SHX3AR56UC/14, SHX3AR56UC/18, SHX3AR56UC/20, SHX3AR75UC/06
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
