WATER LEAKING FROM THE DISHWASHER BASE
Bosch Dishwasher Internal drain hose (from sump) 00645149, Fixes Water leaking from the dishwasher base
Genuine Bosch dishwasher drain hose installed internally from the sump. Bosch states that customer-facing external drain-hose applications should use part 00668108 instead.
Part 00645149Replaces 645149Bosch
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number00645149
Replaces645149
ManufacturerBosch
Appliance TypeDishwasher
Part TypeInternal drain hose (from sump)
✅ Cross Reference Information
Current Part Number00645149
Replaces645149
Common Symptoms
- Visible water leakage beneath or inside the dishwasher from a cracked, split, or poorly seated hose connection.
- Incomplete or slow draining when the hose is kinked, obstructed, or restricted.
- Standing water or drain-related error indications when drainage through the hose is impaired.
Check Before Replacing
- Disconnect electrical power before inspecting the hose or its connections.
- Inspect accessible hose routing for sharp bends, kinks, flattening, cracking, or evidence of rubbing.
- Check the hose connection areas for moisture or dried water residue after a drain operation, without assuming the hose is the confirmed cause.
- If safe access is available, check for a visible obstruction or restriction in the hose and confirm that the drain pump, filter, and downstream drain connection are not the actual source of the symptom.
- After service, run a short rinse or drain operation and observe both hose connections for leaks before fully reinstalling the dishwasher.
Pro Tip
Because 00645149 is the internal sump hose, do not substitute Bosch customer-facing external drain hose 00668108 for this application. Preserve the original hose routing and maintain the dishwasher drain connection's required high loop or air-gap arrangement.
Part Details
Part Number00645149
Part TypeInternal drain hose (from sump)
ManufacturerBosch
Appliance TypeDishwasher
Primary FunctionCarries wastewater internally from the dishwasher sump to the drain system.
Installation Notes
- Disconnect electrical power and shut off the water supply before accessing the internal hose.
- Internal access may require moving or removing the dishwasher according to the appliance's model-specific service procedure.
- Before disconnecting the old hose, document or note its original routing and connection orientation.
- Transfer or reuse only the applicable original connection hardware when appropriate; do not add unverified fasteners, sealants, or adhesives.
- Route the replacement hose exactly as required for the appliance and verify that it is not kinked, sharply bent, or rubbing against surrounding components.
- After reconnection, restore utilities and check the hose connections for leaks during a drain operation before returning the dishwasher to its final position.
Verified Compatible Models
S36KMK12UC, S36KMK12UC-05, S36KMK15UC, S36KMK15UC-05, S36KMK16UC, S36KMK16UC-05, S46KMK12UC, S46KMK12UC-05, S46KMK15UC, S46KMK15UC-05, S46KMK16UC, S46KMK16UC-05, SHE3AR52UC, SHE3AR52UC/06, SHE3AR52UC/07
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
