Dishwasher Rack Not Getting Clean? Bosch Diverter Valve 00751950 – Fix Uneven Water Distribution Fast
A failed diverter valve causes one rack of your Bosch dishwasher to come out dirty while the other rack cleans normally — the clearest sign water is no longer alternating between spray arm circuits. In most Bosch dishwashers, this is caused by a failed diverter valve — the component at the base of the tub that routes wash water between the lower and upper spray arm assemblies on alternating cycles. When it fails, the valve sticks in one position, starving one rack of water pressure entirely while the other receives full flow. ⚡ Common failure point in Bosch SHE, SHP, SHX, SHV, and SHM series dishwashers. Part 00751950 is the genuine OEM replacement that restores proper water alternation and full cleaning performance across all racks immediately.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Dishwasher powers on and completes full wash cycles
- ✔ Water fills and drains normally
- ✔ Spray arms spin freely and are not clogged
- ✔ ONLY problem is one rack (top or bottom) consistently comes out dirty or under-washed
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Top rack dishes come out dirty while bottom rack is clean (or vice versa)
- Food residue left on dishes despite a full wash cycle
- Dishwasher runs but cleaning performance has noticeably declined
- Spray arm on one level has little to no water pressure during the wash
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this diverter valve restores full cleaning performance across all racks immediately.
📦 Part Details
- Part Number: 00751950
- Type: Dishwasher Diverter Valve — Controls water routing between upper and lower spray arm circuits
- Replaces: 751950, 00751950XP, AP5983730, PS11722152
- Brands: Bosch, Siemens, Thermador, Gaggenau
While the lower rack and spray arm are removed, inspect the spray arm nozzles for mineral buildup or blockage — clogged nozzles cause identical symptoms and are often overlooked. Clean or replace the spray arms at the same time to ensure full cleaning performance after the valve repair.
⚙️ Installation
Skill Level: MODERATE — 20–30 minutes. No special tools required. Disconnect power to the dishwasher before servicing. Remove the lower rack and unscrew the lower spray arm to access the sump area. The diverter valve snaps or screws into the sump housing at the base of the tub — remove the old valve, seat the new 00751950 into position, and reassemble. Run a short wash cycle and confirm both spray arms receive water.
✓ Compatible Models
Confirmed compatible with SHXM63WS5N, SHXM63W55N, SHX88PW55N, SHE878WD5N, SHP865WD5N, SHPM78W55N, SHV68TL3UC, SHEM78W55N, SHSM63W55N plus hundreds of additional Bosch, Siemens, Thermador, and Gaggenau dishwasher models. Contact us to verify your model number before ordering.
💡 Pro Tip
Before ordering the diverter valve, remove both spray arms and run water through the nozzles — if they're clogged with mineral deposits, a simple cleaning or spray arm replacement may restore full performance without replacing the valve. If the spray arms are clear and one rack still won't clean, the diverter valve is your fix.
Model-Specific Repair Pages
Don't see your model? Contact us and we'll verify compatibility for you.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
