Miele GS SA 1502 P Dishwasher Salt 10248600, Replaces 21995501USA

Extra-coarse dishwasher reactivation salt for optimum function and performance of Miele dishwashers; helps protect the machine and dishes from limescale deposits. Package is identified by Miele as 1.5 kg (3.3 lb).

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Salt-refill indicator remains on or an insufficient-salt message appears.
• White, wipeable mineral residue or clouding may occur on dishes when the water softener lacks salt.
• Rust staining on cutlery may occur if salt spills into the wash cabinet and no empty rinse cycle is run afterward.

Check Before Replacing

• Check the dishwasher display or salt indicator after the wash program ends.
• With the dishwasher off, inspect the salt-reservoir cap for secure closure and check whether the reservoir needs refilling.
• Confirm that the reservoir contains coarse dishwasher reactivation salt, not detergent or another type of salt.
• If salt was recently added or the cap was removed, check whether the appliance manual specifies an empty rinse or low-temperature cycle to remove residual salt.
• If detergent was accidentally put in the salt reservoir, do not start the dishwasher; contact Miele service.

Pro Tip

Part Details

Key Features

• Miele GS SA 1502 P dishwasher reactivation salt.
• Extra-coarse grain specifically suited to Miele dishwashers.
• 1.5 kg (3.3 lb) package.
• Helps protect the dishwasher and dishes from limescale deposits.
• Official manufacturer EAN: 4002515641002.

Installation Notes

• This is a consumable refill, not a mechanically installed replacement part.
• Use only in a dishwasher equipped with a salt reservoir/water-softening system and follow the appliance-specific operating instructions.
• Remove the lower basket and open the salt reservoir only when refilling, as water or brine may escape.
• For first use of a salt reservoir, follow the dishwasher manual regarding initial water filling; subsequent refills generally do not require adding water.
• Fill carefully, remove excess salt from the reservoir opening, and tighten the cap firmly.
• Run the empty rinse/removal cycle specified by Miele immediately after filling; do not load dishes during that cycle.

Verified Compatible Models

G 5056 SCVI ACTIVE, G 5056 SCVI SFP, G 5058 SCVI SFP ACTIVE, G 5266 SCVI, G 5482 SCVI SL, G 5892 SCVI SL, G 7166 SCVI XXL AUTODOS, G 7186 SCVI AUTODOS, G 7196 SCVI SF AUTODOS, G 7766 SCVI AUTODOS

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.