NO ICE PRODUCTION
Whirlpool Refrigerator Add-On Ice Maker Kit 1129313, Fixes No ice production
Genuine Whirlpool round-plug add-on ice maker installation kit for certain pre-wired, porcelain-lined refrigerators with 30-, 33-, or 36-inch-wide cabinets. Kit includes the ice maker, wiring harness, fill tube(s), water inlet valve, ice bin, mounting hardware, and instructions.
Part 1129313Replaces 1105298, 1114185, 1118554, 1118555, 1118746, 1129312, 1129313VP, 1129314, 468150, 940556, 941555, 984827, 987613, ECKMF-61, ECKMF-64, KIMF8, KIMF-81Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number1129313
Replaces1105298, 1114185, 1118554, 1118555, 1118746, 1129312, 1129313VP, 1129314, 468150, 940556, 941555, 984827, 987613, ECKMF-61, ECKMF-64, KIMF8, KIMF-81
ManufacturerWhirlpool
Appliance TypeRefrigerator
Part TypeAdd-On Ice Maker Kit
✅ Cross Reference Information
Current Part Number1129313
Replaces1105298, 1114185, 1118554, 1118555, 1118746, 1129312, 1129313VP, 1129314, 468150, 940556, 941555, 984827, 987613, ECKMF-61, ECKMF-64, KIMF8, KIMF-81
Common Symptoms
- No ice is produced after the kit is installed and turned on.
- Ice production is insufficient or delayed.
- Water overflows from the ice maker.
- Ice making stops because the shut-off arm is raised, the water supply is off, or water flow is restricted.
Check Before Replacing
- Confirm the ice-maker shut-off arm is lowered to the ON position.
- Verify the refrigerator is connected to a water supply and the shut-off valve is open.
- Visually inspect the fill tube and inlet area for blockage or frozen water without disassembling the valve.
- Check that the refrigerator and ice maker are level if water overflows.
- After installation, inspect the water connections for leaks and allow sufficient time for initial ice production.
- If a water filter is installed, confirm it is fully seated and sealing correctly because improper installation can restrict water flow.
Pro Tip
A newly installed unit may require approximately 24 hours to begin making ice and up to 48 hours to fill the ice bucket; discard the first two or three batches if the ice has an off taste.
Part Details
Part Number1129313
Part TypeAdd-On Ice Maker Kit
ManufacturerWhirlpool
Appliance TypeRefrigerator
Primary FunctionAdds automatic ice production to a compatible pre-wired refrigerator by supplying the ice maker, water valve, fill tubing, wiring harness, ice bin, and mounting hardware.
Installation Notes
- Disconnect refrigerator power before installation.
- Confirm the supplied wiring connector fits and locks with the refrigerator connection; connectors are designed to fit together only one way.
- Install the fill tube with its spout facing downward and ensure it is properly secured and sealed.
- Use the specified water-supply arrangement from the installation guide; Whirlpool specifies a regular shut-off valve and 1/4-inch outside-diameter copper tubing and warns against piercing-type valves and polyethylene tubing.
- Mount the ice maker securely without overtightening fasteners, then verify that the unit is level.
- Turn on the water supply, check all connections for leaks, reconnect power, and lower the shut-off arm to start ice production.
Verified Compatible Models
106.7611442, 106.7645260, 106.7697060, 106.8601610, 106.8615640, 253.7611100, 253.7618122, 628.7626510, EF19MKXSW01
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
