Whirlpool Corporation Range Oven igniter kit 12400035, Replaces 7432P025-60, 7432P026-60, 7432P051-60, 7432P052-60, 7432P062-60, 7432P064-60, 7432P066-60, 7432P067-60, 7432P076-60, W10125528, W10127324, 790023, 790401

Universal-style flat gas oven and broiler igniter kit for ranges. Designed for approximately 3.3–3.6 amps and intended to replace many short- or long-style flat igniters. It is not intended for round or blue-ceramic igniters.

Is This the Right Part?

Common Symptoms

• Igniter does not glow when the oven calls for heat
• Igniter glows but the burner does not ignite
• Igniter glows weakly or remains orange/red instead of reaching operating temperature
• Slow preheating or little heat during baking
• Little or no heat during broiling

Check Before Replacing

• With the appliance cool, disconnected from electrical power, and the gas supply handled safely, visually inspect the igniter for cracks, damage, or a burned-out element.
• Observe the igniter during a normal heating call without touching internal parts: no glow or prolonged glowing without ignition is consistent with an ignition-system fault, but does not by itself prove the igniter is defective.
• Inspect accessible igniter wiring and connectors for looseness, heat damage, or broken insulation.
• Confirm that the replacement is a flat-style igniter and that the appliance wiring and mounting arrangement correspond to the kit; this part is not for round or blue-ceramic igniters.
• Have a qualified technician test igniter current and the gas-valve/ignition circuit when visual checks do not identify the problem.

Pro Tip

Part Details

Key Features

• Whirlpool OEM flat-style oven and broiler igniter kit
• Universal-style design intended to replace multiple short- and long-style flat igniters
• Approximately 3.3–3.6 amp operating range
• Kit includes installation hardware/adapters intended to accommodate different wiring and mounting arrangements
• Not intended to replace round-style or blue-ceramic igniters

Installation Notes

• Disconnect electrical power before servicing and follow the appliance service instructions.
• Allow the oven to cool completely before accessing the burner and igniter.
• Use the supplied insulation and wiring components as applicable to the appliance’s original configuration.
• Avoid touching, bending, dropping, or otherwise stressing the igniter element.
• Verify that the igniter is securely mounted and that wiring is routed away from heat and moving parts before restoring power.
• If gas odor persists or the burner does not ignite after servicing, shut off the appliance and have it inspected by a qualified technician.

Verified Compatible Models

CG3131WUA, CG3131WUW, CG3131XUA, CG3131XUW, CG3231XUA, CG3231XUW, CGS1750ADH, CGS1750ADL, CRG7700BAL, CRG7700BAW, CRG8200BAL, CRG8200BAW, CRG9300CAL, CRG9300CAW, H3131WUA

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.