OVEN OR BROILER FAILS TO IGNITE
Whirlpool Corporation Range Oven igniter kit 12400035, Fixes Oven or broiler fails to ignite
Universal-style flat gas oven and broiler igniter kit for ranges. Designed for approximately 3.3–3.6 amps and intended to replace many short- or long-style flat igniters. It is not intended for round or blue-ceramic igniters.
Part 12400035Replaces 7432P025-60, 7432P026-60, 7432P051-60, 7432P052-60, 7432P062-60, 7432P064-60, 7432P066-60, 7432P067-60, 7432P076-60, W10125528, W10127324, 790023, 790401Whirlpool Corporation
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number12400035
Replaces7432P025-60, 7432P026-60, 7432P051-60, 7432P052-60, 7432P062-60, 7432P064-60, 7432P066-60, 7432P067-60, 7432P076-60, W10125528, W10127324, 790023, 790401
ManufacturerWhirlpool Corporation
Appliance TypeRange
Part TypeOven igniter kit
✅ Cross Reference Information
Current Part Number12400035
Verified Previous OEM Numbers7432P025-60, 7432P026-60, 7432P051-60, 7432P052-60, 7432P062-60, 7432P064-60, 7432P066-60, 7432P067-60, 7432P076-60, W10125528, W10127324, 790023, 790401
Common Symptoms
- Igniter does not glow when the oven calls for heat
- Igniter glows but the burner does not ignite
- Igniter glows weakly or remains orange/red instead of reaching operating temperature
- Slow preheating or little heat during baking
- Little or no heat during broiling
Check Before Replacing
- With the appliance cool, disconnected from electrical power, and the gas supply handled safely, visually inspect the igniter for cracks, damage, or a burned-out element.
- Observe the igniter during a normal heating call without touching internal parts: no glow or prolonged glowing without ignition is consistent with an ignition-system fault, but does not by itself prove the igniter is defective.
- Inspect accessible igniter wiring and connectors for looseness, heat damage, or broken insulation.
- Confirm that the replacement is a flat-style igniter and that the appliance wiring and mounting arrangement correspond to the kit; this part is not for round or blue-ceramic igniters.
- Have a qualified technician test igniter current and the gas-valve/ignition circuit when visual checks do not identify the problem.
Pro Tip
Do not handle the igniter element with bare fingers during installation; contamination or mechanical stress can shorten its service life.
Part Details
Part Number12400035
Part TypeOven igniter kit
ManufacturerWhirlpool Corporation
Appliance TypeRange
Primary FunctionSupplies the high-temperature ignition source for a gas range oven or broiler burner, allowing the safety valve to open and the gas to ignite.
Installation Notes
- Disconnect electrical power before servicing and follow the appliance service instructions.
- Allow the oven to cool completely before accessing the burner and igniter.
- Use the supplied insulation and wiring components as applicable to the appliance’s original configuration.
- Avoid touching, bending, dropping, or otherwise stressing the igniter element.
- Verify that the igniter is securely mounted and that wiring is routed away from heat and moving parts before restoring power.
- If gas odor persists or the burner does not ignite after servicing, shut off the appliance and have it inspected by a qualified technician.
Verified Compatible Models
Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
