CRACKED, TORN, BENT, MISSING, OR POORLY FITTING LINT FILTER
Frigidaire / Electrolux Dryer lint filter assembly 131450300, Fixes Cracked, torn, bent, missing, or poorly fitting lint filter
White dryer lint filter or lint-trap blade assembly that collects lint and debris from exhaust air. Approximately 12 inches long and 7 inches high; one source lists approximate dimensions of 7 x 11.5 inches.
Part 131450300Replaces 131450345Frigidaire / Electrolux
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number131450300
Replaces131450345
ManufacturerFrigidaire / Electrolux
Appliance TypeDryer
Part TypeDryer lint filter assembly
✅ Cross Reference Information
Current Part Number131450300
Replaces131450345
Common Symptoms
- Lint bypasses the filter and accumulates inside the lint-filter housing or exhaust path.
- The filter does not seat or fit correctly in its housing.
- Visible damage such as a cracked frame, torn screen, or bent filter assembly.
Check Before Replacing
- Remove the filter with the dryer turned off and inspect the frame, screen, and edges for cracks, tears, distortion, or missing sections.
- Check that the filter seats fully and evenly in the lint-filter housing without rocking or leaving obvious gaps.
- Clean the filter and inspect the housing opening for accumulated lint or obstructions; do not operate the dryer with a damaged or missing filter.
- If airflow or drying performance remains abnormal after confirming the filter is clean and correctly seated, inspect the exhaust duct and other dryer components separately rather than assuming this filter is the cause.
Pro Tip
Clean the filter after every load and periodically wash it with mild detergent if residue from dryer sheets or fabric softener restricts the screen; reinstall it only after it is fully dry.
Part Details
Part Number131450300
Part TypeDryer lint filter assembly
ManufacturerFrigidaire / Electrolux
Appliance TypeDryer
Primary FunctionCaptures lint and debris from the dryer's exhaust airflow before the air exits the lint-filter housing.
Installation Notes
- Turn the dryer off before removing or installing the filter.
- Remove the old filter and clear loose lint from the filter opening before fitting the replacement.
- Insert the replacement in the same orientation as the removed filter and confirm that it is fully seated and stable.
- Do not operate the dryer if the filter is missing, damaged, or unable to seat correctly.
Verified Compatible Models
41749012890, 41749022890, 41759012890, 41759022890, AEQ6000CES0, AEQ6000CES1, AEQ6000CES2, AEQ6000ES0, AEQ6000ES1, AEQ6000ES2, AEQ6400HS0, AEQ6500CFS0, AEQ6700CFS0, AEQ6700FE0, AEQ6700FS0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
