TIMER SETTING CANNOT BE SELECTED BECAUSE THE KNOB IS CRACKED, STRIPPED, MISSING, OR NO LONGER ENGAGES THE SHAFT
Frigidaire / Electrolux Dryer Timer Knob, white with gray trim 131873500, Fixes Timer setting cannot be selected because the knob is cracked, stripped, missing, or no longer engages the shaft
Genuine OEM dryer timer knob with a D-shaped shaft; used to select the dryer cycle setting.
Part 131873500Replaces 131947300, 134042600Frigidaire / Electrolux
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number131873500
Replaces131947300, 134042600
ManufacturerFrigidaire / Electrolux
Appliance TypeDryer
Part TypeTimer Knob, white with gray trim
✅ Cross Reference Information
Current Part Number131873500
Replaces131947300, 134042600
Common Symptoms
- Knob turns without moving the timer shaft.
- Knob is cracked, broken, or loose.
- Dryer cycle selection cannot be set reliably.
- Timer cannot be turned through the cycle settings using the knob.
Check Before Replacing
- Disconnect the dryer from its electrical power source before inspection or replacement.
- Inspect the knob for cracks, a stripped internal opening, missing sections, or looseness.
- With the knob removed, visually check that the timer shaft has the expected D-shaped profile and is not visibly damaged.
- Confirm that the knob’s D-shaped opening aligns with the flat side of the timer shaft; do not force the knob onto the shaft.
- If the shaft turns but the timer does not respond, treat the knob as an unconfirmed possibility and investigate the timer or related controls separately.
Pro Tip
A knob that spins freely while the timer shaft stays stationary is a strong indication of a stripped or broken knob interface; verify the shaft itself before ordering.
Part Details
Part Number131873500
Part TypeTimer Knob, white with gray trim
ManufacturerFrigidaire / Electrolux
Appliance TypeDryer
Primary FunctionAllows the user to select the dryer cycle by turning the timer through its D-shaped shaft connection.
Installation Notes
- Disconnect electrical power before beginning work.
- Remove the existing knob by pulling it straight off the timer post or shaft.
- Align the flat side of the new knob’s D-shaped opening with the flat side of the shaft.
- Press the replacement knob straight onto the shaft until it is seated; do not force or twist it into place.
Verified Compatible Models
BEF332CES0, CDE2000FW0, CDG2000FW0, CDG2000FW1, CREF342AS0, CREF342AS1, CREF342AS2, CRGF342AS0, CRGF342AS1, CRGF342AS2, CRGF342AS3, CRGF342AS4, DE400ADD1, DE400ADW1, DE650ADD1
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
