Electrolux / Frigidaire Washer Suspension Spring Assembly with Insulators 134144700, Replaces 131277700, 131663600, 134136300

OEM suspension spring assembly with end insulators for selected front-load washers and washer/dryer combination units. The spring supports the outer tub and helps stabilize it during operation.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Excessive vibration during spin
• Banging or abnormal noise when the tub moves
• Tub appears unstable or shifts excessively
• Washer may stop, fail to spin, or fail to drain when excessive tub movement interrupts operation

Check Before Replacing

• Unplug the washer before inspection.
• With the washer empty and stationary, visually inspect the suspension spring and both end insulators for breakage, displacement, or obvious damage.
• Check whether the tub hangs unevenly or moves excessively compared with the normal position shown in the appliance service information.
• Confirm that the spring is attached at both the outer-tub and support-bracket points; do not pull or stretch the spring during inspection.
• Inspect related suspension components, such as shock absorbers and mounting points, because they can produce similar vibration symptoms.

Pro Tip

Part Details

Key Features

• Genuine Frigidaire/Electrolux OEM suspension spring assembly
• Includes insulators at both ends
• Designed for selected front-load washers and washer/dryer combination units
• Manufacturer part number 134144700
• Approximate listed size is 1 x 7 inches

Installation Notes

• Disconnect electrical power before beginning the repair.
• Access requires removal of the washer’s top panel and the spring-retaining cover or bracket, depending on the model.
• Support the outer tub while releasing the old spring and attaching the replacement.
• Position the supplied insulators on both ends of the replacement spring before installation.
• Hook the replacement spring between the outer tub and the support bracket, then reinstall and secure the retaining cover and top panel.
• Verify that the tub is supported normally and that the washer operates without abnormal movement after reassembly.

Verified Compatible Models

38712, 38802, 41724182300, 41724182301, 41727182700, 41727182701, 41727182702, 41727182703, 41727182704, 41729022890, 41729042990, 41729042991, 41729042992, 41729052990, 41729052991

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.