Frigidaire 134144700 Washer Suspension Spring – Genuine OEM Replacement

Electrolux / Frigidaire Washer Suspension Spring Assembly with Insulators 134144700, Replaces 131277700, 131663600, 134136300

XPart Number XP10009914
Sale price
$61.70
Regular price
$62.69
Available by special order
Buying Options: OEM Genuine

Product variant with selected options does not exist!

Frequently Bought Together

Check Fit & Find Parts
Bubba checks verified models, product descriptions, cross-references and store data. Find your model number β†’
EXCESSIVE SHAKING OR MOVEMENT DURING SPIN

Electrolux / Frigidaire Washer Suspension Spring Assembly with Insulators 134144700, Fixes Excessive shaking or movement during spin

OEM suspension spring assembly with end insulators for selected front-load washers and washer/dryer combination units. The spring supports the outer tub and helps stabilize it during operation.

Part 134144700Replaces 131277700, 131663600, 134136300Electrolux / Frigidaire
Guaranteed to Fit β€” or your money back.
Confirm your full appliance model number before ordering.

Is This the Right Part?

Part Number134144700
Replaces131277700, 131663600, 134136300
ManufacturerElectrolux / Frigidaire
Appliance TypeWasher
Part TypeSuspension Spring Assembly with Insulators

βœ… Cross Reference Information

Current Part Number134144700
Replaces131277700, 131663600, 134136300

Common Symptoms

  • Excessive vibration during spin
  • Banging or abnormal noise when the tub moves
  • Tub appears unstable or shifts excessively
  • Washer may stop, fail to spin, or fail to drain when excessive tub movement interrupts operation

Check Before Replacing

  • Unplug the washer before inspection.
  • With the washer empty and stationary, visually inspect the suspension spring and both end insulators for breakage, displacement, or obvious damage.
  • Check whether the tub hangs unevenly or moves excessively compared with the normal position shown in the appliance service information.
  • Confirm that the spring is attached at both the outer-tub and support-bracket points; do not pull or stretch the spring during inspection.
  • Inspect related suspension components, such as shock absorbers and mounting points, because they can produce similar vibration symptoms.

Pro Tip

If one suspension spring is damaged, inspect the other spring and related shock absorbers as well; replacing only the visibly damaged component may not correct vibration if the remaining suspension parts are worn.

Part Details

Part Number134144700
Part TypeSuspension Spring Assembly with Insulators
ManufacturerElectrolux / Frigidaire
Appliance TypeWasher
Primary FunctionSupports the washer’s outer tub and helps control tub movement and vibration during operation.

Installation Notes

  • Disconnect electrical power before beginning the repair.
  • Access requires removal of the washer’s top panel and the spring-retaining cover or bracket, depending on the model.
  • Support the outer tub while releasing the old spring and attaching the replacement.
  • Position the supplied insulators on both ends of the replacement spring before installation.
  • Hook the replacement spring between the outer tub and the support bracket, then reinstall and secure the retaining cover and top panel.
  • Verify that the tub is supported normally and that the washer operates without abnormal movement after reassembly.

Verified Compatible Models

38712, 38802, 41724182300, 41724182301, 41727182700, 41727182701, 41727182702, 41727182703, 41727182704, 41729022890, 41729042990, 41729042991, 41729042992, 41729052990, 41729052991

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Hours
Mon–Fri 9β€―AM–5β€―PM β€’ Sat 9β€―AM–1β€―PM
Get Directions