Menu
When your front-load washer starts banging against the cabinet, walking across the floor, or shaking violently on the spin cycle, the damper shock absorbers are almost always the culprit. A failed damper lets the drum swing freely — stressing the bearings, spider arm, and drum seal with every load. This is your last chance to source part 134560400: it is no longer manufactured and stock is limited to what's on hand.
⚠️ Symptoms of a Failed Washer Damper
- Washer banging loudly or thumping during spin
- Machine walking or moving across the floor
- Excessive vibration felt through the floor
- Drum visibly swinging or hitting the door seal
- Unbalanced load errors even with small, balanced loads
- Premature bearing or spider arm wear
✓ Part Details & Cross-References
- OEM Part Number: 134560400
- Replaces: 5304485917 · WG04L02963 · WH1M1184
- Kit Contents: Complete damper shock absorber set (all units required for full replacement)
- Fit Type: Direct OEM replacement — no modification required
- Availability: NLA – No Longer Available from manufacturer; final stock only
💡 Pro Tip — Replace All Dampers at Once:
Dampers wear at the same rate. If one has failed, the others are close behind. Replacing only the visibly broken unit leaves the drum unbalanced and accelerates bearing and spider arm wear. Replace the full set in a single labour visit — it's the only way to restore proper drum geometry and protect the rest of the drivetrain.
Dampers wear at the same rate. If one has failed, the others are close behind. Replacing only the visibly broken unit leaves the drum unbalanced and accelerates bearing and spider arm wear. Replace the full set in a single labour visit — it's the only way to restore proper drum geometry and protect the rest of the drivetrain.
⚙️ Installation Notes
- Skill Level: Intermediate — front panel or top panel removal required depending on model
- Always disconnect power before beginning any repair
- Torque Warning: Do not overtighten mounting pins — damper brackets are plastic and will crack
- Inspect drum bearing and door seal for secondary damage before reassembly
- Test with a small balanced load before returning to service
✓ Compatible Models
This part is compatible with select GE, Electrolux, and Frigidaire front-load washing machines that originally used part numbers 134560400, 5304485917, WG04L02963, or WH1M1184. Verify your model number against your existing part before ordering — final sale, no returns.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
