Frigidaire / Electrolux Dryer Lint Filter 134701410 – Superseded by 134701420

White dryer lint filter/screen installed at the dryer door opening. It traps lint and debris and supports proper airflow. The filter should be cleaned before each load and replaced if torn, damaged, clogged, or restricting airflow.

Is This the Right Part?

Common Symptoms

• Longer-than-usual drying times when the screen is clogged or coated with residue
• Lint remaining on clothing when the screen is damaged or torn
• Reduced airflow through the filter
• Visible tears, rips, melting, or permanently blocked mesh

Check Before Replacing

• Remove the filter with the dryer stopped and inspect the mesh for lint buildup, residue, tears, rips, melting, or blocked openings.
• Clean loose lint from the screen and verify that air can pass through the mesh; wash only if residue buildup remains, then dry the filter completely before reinstalling.
• Confirm that the filter is seated correctly at the dryer door opening and is not loose, missing, or installed at an angle.
• If drying remains poor after the filter is clean and intact, inspect the appliance venting or arrange qualified service rather than assuming the filter is the cause.

Pro Tip

Part Details

Key Features

• Genuine Frigidaire OEM dryer lint filter
• White lint screen designed for installation at the dryer door opening
• Fine mesh screen captures lint and debris from exhaust airflow
• Supports proper dryer airflow when clean and undamaged
• Replaced by OEM part 134701420 according to the trusted archive

Installation Notes

• Stop the dryer before removing or installing the filter.
• Remove the existing screen from the dryer door opening and slide the replacement into the filter slot in the correct orientation.
• Ensure the filter is fully seated before operating the dryer.
• Do not operate the dryer with the filter missing, loose, damaged, or incorrectly seated.
• Clean the filter before or after every load; dry it completely if it is washed.

Verified Compatible Models

CDE4500KW0, CDE4700LB0, CDE4700LW0, CDE7500KB0, CDE7500KR0, CDE7500KW0, CDE7700LR0, CDE7700LW0, CDE7700LW1, CDEC450KW0, CDEC750KW0, CDG4500KW0, CDG4700LB0, CDG4700LW0, CDG4701QW0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.