Frigidaire / Electrolux Dryer Lint Filter 134701410 – Superseded by 134701420

Is This the Right Part?

Common Symptoms

• Longer-than-usual drying times when the screen is clogged or coated with residue
• Lint remaining on clothing when the screen is damaged or torn
• Reduced airflow through the filter
• Visible tears, rips, melting, or permanently blocked mesh

Check Before Replacing

• Remove the filter with the dryer stopped and inspect the mesh for lint buildup, residue, tears, rips, melting, or blocked openings.
• Clean loose lint from the screen and verify that air can pass through the mesh; wash only if residue buildup remains, then dry the filter completely before reinstalling.
• Confirm that the filter is seated correctly at the dryer door opening and is not loose, missing, or installed at an angle.
• If drying remains poor after the filter is clean and intact, inspect the appliance venting or arrange qualified service rather than assuming the filter is the cause.

Pro Tip

Part Details

Installation Notes

• Stop the dryer before removing or installing the filter.
• Remove the existing screen from the dryer door opening and slide the replacement into the filter slot in the correct orientation.
• Ensure the filter is fully seated before operating the dryer.
• Do not operate the dryer with the filter missing, loose, damaged, or incorrectly seated.
• Clean the filter before or after every load; dry it completely if it is washed.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.