134890600 Washer Water Inlet Valve
134890600 Washer Water Inlet Valve
134890600 Washer Water Inlet Valve
134890600 Washer Water Inlet Valve

Frigidaire / Electrolux Home Products Washer Water inlet valve with thermistor 134890600

XPart Number XP10009419
Sale price
$95.99
Regular price
$198.25
In stock and ready for shipping
Title: OEM Genuine

Product variant with selected options does not exist!

Frequently Bought Together

Check Fit & Find Parts
Bubba checks verified models, product descriptions, cross-references and store data. Find your model number →
WASHER FILLS SLOWLY OR DOES NOT FILL CORRECTLY

Frigidaire / Electrolux Home Products Washer Water inlet valve with thermistor 134890600, Fixes Washer fills slowly or does not fill correctly

Genuine OEM washing-machine water inlet valve with thermistor; controls water flow into the washer. Also used in some washer/dryer laundry centers.

Part 134890600Frigidaire / Electrolux Home Products
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.

Is This the Right Part?

Part Number134890600
ManufacturerFrigidaire / Electrolux Home Products
Appliance TypeWasher
Part TypeWater inlet valve with thermistor

✅ Cross Reference Information

Current Part Number134890600

Common Symptoms

  • Slow or insufficient filling
  • No water entering during a fill portion of the cycle
  • Water inlet leakage
  • Washer overfilling or failing to stop filling
  • Temperature-sensing or temperature-control problems related to the integrated thermistor

Check Before Replacing

  • Confirm both household hot- and cold-water supply valves are fully open.
  • Inspect the inlet hoses for kinks, crushed sections, or restricted flow.
  • With power disconnected and water supplies turned off, inspect the valve and hose connections for visible cracking, mineral buildup, or leakage.
  • Check the valve inlet screens for visible debris without damaging or removing them.
  • Observe whether the washer calls for water and whether the valve produces an audible solenoid click; absence of a click does not by itself prove valve failure.
  • If qualified to perform appliance electrical testing, follow the appliance-specific technical documentation for testing the valve and thermistor; do not test exposed live wiring unless properly trained.

Pro Tip

Before condemning the valve, verify household water supply, hose condition, and visible inlet-screen blockage; these external restrictions can mimic a defective inlet valve.

Part Details

Part Number134890600
Part TypeWater inlet valve with thermistor
ManufacturerFrigidaire / Electrolux Home Products
Appliance TypeWasher
Primary FunctionControls washer water entry through its inlet solenoid valve(s) and monitors incoming water temperature with the integrated thermistor.

Installation Notes

  • Disconnect electrical power and turn off both hot- and cold-water supplies before service.
  • Expect residual water when disconnecting the supply hoses or fill hose; protect the floor and nearby components.
  • Record or photograph the orientation of the solenoid and thermistor wiring before disconnecting it.
  • Reconnect the thermistor and solenoid wires to their original corresponding terminals.
  • Ensure the fill hose and its clamp are securely reattached, then restore the water supply and check for leaks before normal operation.

Verified Compatible Models

417.97962702, CLCE500FW4, CLCG500FW1, CLCG500FW5, CTW100FW1, FEX831FS2, FGX831FS2, FLEB8200FS4, FWS1233FS1, GLGT1142FS1, GLGT1142FS2, GLGT1142FS3, GLWS1439FC1, WWS833FS1, WWS833FS2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions