Frigidaire Multi-Rib Drum Belt / Dryer Drum Drive Belt 137292700, Replaces 134503900, 134163500, 5303283287, Fixes Dryer motor runs, but the drum does not turn
OEM multi-rib dryer drum belt that transfers rotation from the drive motor to the drum. Documented dimensions are 88.75 inches long by 1/4 inch wide.
OEM multi-rib dryer drum belt that transfers rotation from the drive motor to the drum. Documented dimensions are 88.75 inches long by 1/4 inch wide.
Is This the Right Part?
Common Symptoms
- Drum will not tumble or rotate
- Thumping, squeaking, or other unusual belt-related noise during operation
- Drum has unusually little resistance or excessive free movement when rotated by hand while the dryer is disconnected from power
- Visible belt cracking, fraying, stretching, or breakage
- Longer-than-normal drying time when belt slippage reduces drum rotation
Check Before Replacing
- Disconnect electrical power before inspection or service.
- If the motor can be heard running while the drum remains stationary, inspect the belt as a possible cause; this symptom alone does not confirm belt failure.
- With power disconnected, visually inspect the accessible belt for breakage, fraying, cracking, stretching, or displacement.
- With power disconnected, rotate the drum by hand and note whether it has unusually little resistance; use this only as an indication for further inspection, not as a definitive diagnosis.
- Verify the replacement belt number and dimensions against the appliance model documentation before installation.
Pro Tip
Part Details
Key Features
- Frigidaire OEM multi-rib dryer drum drive belt
- Approximately 88.75 to 89.5 inches long and 1/4 inch wide, depending on the listed measurement convention
- Flat belt with multiple ribs; retailer specifications commonly describe four ribs and three grooves
- Attaches to the motor pulley and drives the drum
- Replaces Frigidaire OEM numbers 134503900, 134163500, and 5303283287
Installation Notes
- Disconnect and isolate electrical power before beginning installation.
- Confirm that the appliance model calls for part 137292700 before fitting the belt.
- Install the belt according to the appliance-specific service information, following the documented belt path around the drum and motor pulley.
- Do not rely on symptom resolution alone; after installation, verify that the drum rotates normally and that the belt tracks correctly during operation.
- If access requires cabinet disassembly, follow the appliance service documentation and avoid working on the dryer while energized.
Verified Compatible Models
41761712511, 41761722511, 41761723511, 41761732810, 41761732811, 41761733810, 41761733811, 41771712510, 41771712511, 41771712512, 41771722510, 41771722511, 41771722512, 41771723510, 41771723511
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
