Frigidaire / Electrolux Dishwasher drain hose 154225602, Replaces 154225601, 08057467

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Standing water remains in the dishwasher after a cycle.
• Water leaks from a cracked, punctured, kinked, or improperly connected hose.
• Drainage is slow or restricted by a clog or obstruction.
• Leakage occurs near the dishwasher motor or drain-hose connection.

Check Before Replacing

• Inspect the visible hose length and connection areas for cracks, punctures, kinks, loose connections, or wetness.
• With the dishwasher unplugged, check accessible hose sections for visible blockage or crushing.
• Verify that the hose is securely connected at the dishwasher and drain-end connection.
• If a clog is suspected, inspect the hose connection points and drain branch for obstruction without forcing tools through the hose.
• Confirm the replacement hose length and connector orientation against the removed hose before installation.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the dishwasher water supply before beginning service.
• Pull the dishwasher out only as far as necessary and protect the floor and surrounding cabinetry from residual water.
• Transfer the hose connection arrangement to the replacement part without sharply bending or kinking the hose.
• Secure the hose at the dishwasher and drain-end connections using the existing connection method and confirm both ends are fully seated.
• Route the hose so it is not pinched behind the dishwasher or cabinetry, then check for leaks during a short drain or rinse test.

Verified Compatible Models

F71C12PHS0, F71C12PHS1, F71C24RJB0, F71C24RJB1, F71C44EJB0, F71C44EJS0, FD1870CHS0, FD1870WHB0, FD1870WHS0, FDB101SAW0, FDB125RHB0, FDB125RHB1, FDB125RHB2, FDB125RHD0, FDB125RHD2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.