The 1718601700 is the current OEM dishwasher detergent and rinse aid dispenser, superseding the discontinued 1719000300. This dispenser assembly mounts to the inside of the dishwasher door and automatically releases detergent at the correct point in the wash cycle, while the rinse aid compartment dispenses rinse agent during the final rinse to prevent water spots and improve drying. When the dispenser fails, detergent may not release during the cycle, resulting in dishes that are not properly cleaned.

✓ Model-Specific Repair Pages

Don't see your model? Contact us with your dishwasher model number and we'll confirm compatibility.

The 1718601700 is a direct OEM replacement that installs in the same door-mounted position as the original 1719000300 dispenser. It includes the detergent cup with spring-loaded door, rinse aid reservoir with adjustable dispense setting, and all mounting hardware. This is the only currently available OEM part number for this dispenser position.

✓ Common Symptoms Fixed

Replacing the 1718601700 dispenser typically resolves the following issues:

• Detergent not releasing during the wash cycle
• Dishes coming out dirty or with detergent residue
• Dispenser door not opening during the cycle
• Rinse aid not dispensing, leaving water spots on dishes
• Broken, cracked, or stuck dispenser door

✓ Key Features & Specifications

• OEM part number: 1718601700
• Supersedes: 1719000300
• Includes detergent cup, spring-loaded door, and rinse aid reservoir
• Door-mounted installation
• Adjustable rinse aid dispense setting

✓ Buying Options

OEM (1718601700): The current genuine OEM dishwasher detergent and rinse aid dispenser. Direct replacement for the discontinued 1719000300. Exact fit and function for a reliable repair.

✓ Replacement Part Numbers

1718601700 supersedes the following part numbers:

• 1719000300

✓ Installation Tips

• Disconnect power to the dishwasher before beginning.
• Open the dishwasher door fully to access the inner door panel.
• Remove the screws securing the inner door panel and lift it away to expose the dispenser mounting area.
• Disconnect the wiring harness from the existing dispenser and remove the mounting screws.
• Install the new 1718601700 dispenser, reconnect the harness, and secure with the mounting screws.
• Reinstall the inner door panel, restore power, and run a test cycle to confirm the dispenser door opens correctly.