Dishwasher Control Panel Blank or Unresponsive? Module Indicator 1755800254 — Restore Display & Function Fast
A dishwasher with a blank, dim, or completely unresponsive control panel display is almost always caused by a failed module indicator assembly. In most Bosch-built dishwashers, the module indicator is the integrated display and indicator light assembly that shows cycle status, error codes, and program selections. When it fails, the panel goes dark or unresponsive — the dishwasher may still run blind, or it may refuse to start entirely due to loss of user input. ⚡ Common failure point in Bosch-platform dishwashers. Part 1755800254 is the genuine OEM replacement that restores full control panel display and program selection functionality.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Dishwasher powers on and water/pump functions work
- ✔ Control board has been confirmed functional (no fault codes stored)
- ✔ Door latch and door switch confirmed OK
- ✔ ONLY problem is a blank, dim, or unresponsive control panel display
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Control panel display is completely blank or very dim
- Indicator lights do not illuminate during any cycle
- Buttons appear to work but no visual feedback is shown
- Dishwasher runs a cycle but display never updates or shows progress
- Error codes cannot be read because display is non-functional
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this module indicator restores full display and control panel operation immediately.
📦 Part Details
- Part Number: 1755800254
- OEM Reference: 00-1755800254
- Type: Dishwasher Module Indicator / Control Panel Display Assembly
- Brands: Bosch, Thermador, Gaggenau
While the door panel is open, inspect the ribbon cable connecting the module indicator to the main control board. A cracked or unseated ribbon cable is a common secondary cause of display failure — if the cable is damaged, replacing the module indicator alone will not restore function.
⚙️ Installation
Skill Level: Moderate — 20–30 minutes. Disconnect power before servicing. Open the dishwasher door and remove the inner door panel screws to access the control assembly. Carefully disconnect the ribbon cable and wire connectors from the old module indicator, transfer them to the new 1755800254 assembly, and reassemble the door panel. Restore power and run a test cycle to confirm display and all indicators function correctly.
✓ Compatible Models
Confirmed compatible with SHE3AR72UC, SHE3AR75UC, SHE3AR76UC, SHE5AM06UC, SHE5AM12UC, SHE5AM16UC, SHE5AM72UC, SHE7PT55UC, SHE7PT56UC, and additional Bosch, Thermador, and Gaggenau dishwasher models. Contact us to verify your model number before ordering.
💡 Pro Tip
Before ordering a new module indicator, carefully reseat the ribbon cable between the display assembly and the control board — a partially disconnected ribbon is a frequent cause of blank displays and costs nothing to fix. If reseating the cable restores the display temporarily but it fails again, the cable itself is damaged and needs replacement. Only replace the module indicator if the cable is confirmed intact and properly seated.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
