Frigidaire Refrigerator Condenser Fan Blade 240524102, Replaces 7240524101, 240560001, 240524101

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Rattling, clicking, scraping, or vibrating noise from the lower rear of the refrigerator
• Refrigerator or freezer compartment is too warm when condenser airflow is reduced
• Visible cracks, broken fins, or other damage to the condenser fan blade
• Fan blade does not rotate freely or contacts the surrounding housing

Check Before Replacing

• Disconnect electrical power before accessing the condenser fan area.
• Visually inspect the blade for cracks, missing fins, obstruction, or contact with the fan housing.
• With power disconnected, carefully check that the blade rotates freely on the motor shaft and does not wobble excessively.
• After reassembly, restore power and observe the condenser fan only during a cooling cycle; verify that the blade turns without unusual noise or housing contact.
• Do not assume the blade is the cause of a warm refrigerator without also checking other cooling-system components.

Pro Tip

Part Details

Installation Notes

• Disconnect power before servicing the refrigerator.
• Access the condenser-fan assembly according to the appliance's model-specific service instructions.
• Remove the existing blade from the motor shaft without damaging the motor or surrounding wiring.
• Press the replacement blade fully onto the motor shaft, then manually check for free rotation and adequate housing clearance before restoring power.
• Reinstall any removed access panel and confirm quiet fan operation during a cooling cycle.

Verified Compatible Models

253.57184600, E32AF75FPS0, FRT18S6JBO

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.