ICE DISPENSER DOES NOT SWITCH CORRECTLY BETWEEN CRUSHED AND CUBED ICE
Frigidaire / Electrolux Refrigerator Dispenser Solenoid 241675705, Fixes Ice dispenser does not switch correctly between crushed and cubed ice
Ice dispenser solenoid that actuates the ice-container deflector to select crushed or cubed ice.
Part 241675705Replaces 241675804Frigidaire / Electrolux
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number241675705
Replaces241675804
ManufacturerFrigidaire / Electrolux
Appliance TypeRefrigerator
Part TypeDispenser Solenoid
✅ Cross Reference Information
Current Part Number241675705
Replaces241675804
Common Symptoms
- Dispenser produces only crushed ice or only cubed ice.
- Ice dispenser does not dispense because the deflector door does not actuate.
- Intermittent or weak deflector movement during ice selection.
- A solenoid actuator pin does not move freely.
Check Before Replacing
- Disconnect appliance power before accessing the component.
- Inspect the dispenser solenoid connector and wiring for looseness or visible damage.
- With power disconnected, test the solenoid coil for continuity using a multimeter; an open coil indicates a failed electrical path but does not by itself prove the complete dispenser fault.
- Check that the actuator pin and connected deflector mechanism move freely without forcing them.
- If the appliance design permits an appropriate service-mode or operating check, observe whether the solenoid actuates when crushed/cubed selection is changed; do not contact energized wiring.
Pro Tip
Before replacing the solenoid, confirm that the ice-container deflector and actuator pin are not obstructed or binding; a mechanically restricted deflector can mimic a failed solenoid.
Part Details
Part Number241675705
Part TypeDispenser Solenoid
ManufacturerFrigidaire / Electrolux
Appliance TypeRefrigerator
Primary FunctionElectromechanical ice-dispenser solenoid that moves the ice-container deflector to select crushed or cubed ice.
Installation Notes
- Disconnect electrical power before servicing the dispenser assembly.
- Remove and handle the ice container carefully to access the selector mechanism.
- Compare the replacement part’s connector, actuator arrangement, and mounting position with the removed component before installation.
- Ensure the actuator pin and ice-container deflector move freely after installation.
- Restore power and verify crushed/cubed selection and ice dispensing operation.
Verified Compatible Models
FRSS23L3AF0, FRSS26L3AB0, FRSS26L3AF0, FRSS26L3AW0, FRSS2323AB0, FRSS2323AS0, FRSS2323AW0, FRSS2333AS0, FRSS2623AB0, FRSS2623AS0, FRSS2623AW0, FRSS2633AS0, GRSS2652AD0, GRSS2652AF0, PRMC2285AF
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
