Frigidaire Refrigerator Ice Maker Assembly 241798231, Replaces 241642501, 241642503A, 241642511, 241798201, 241798209, 241798211, 241798220, 241798224, 3206327, 3206329, 5303320545, 5304445222, 5304456669, 5304456671, 53

Genuine OEM refrigerator ice-maker assembly with cover and wire harness; produces eight-radius ice cubes.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Ice maker will not start or harvest cubes
• Ice maker produces little or no ice
• Ice maker leaks or splashes water
• Ice maker makes clicking or unusual operating noise
• Ice mold is flaking or corroded
• Ice maker overfills

Check Before Replacing

• Confirm the ice-level bail arm is in the operating position rather than raised or switched off.
• Check that the refrigerator/freezer is cold enough for ice production and that the ice maker mold is not heavily iced over.
• Inspect the water fill tube and visible water path for blockage or freezing.
• Check whether the refrigerator water filter is clogged or overdue for replacement.
• Inspect the ice-maker wire harness and connector for looseness, damage, or corrosion.
• Look for mold flaking, corrosion, cracks, or water leakage before condemning the complete assembly.

Pro Tip

Part Details

Key Features

• Genuine Frigidaire OEM refrigerator ice-maker assembly
• Eight-cube heated mold
• Includes cover and wire harness according to the archived part description
• Designed to receive water from the refrigerator water-inlet system and eject frozen cubes into the ice bucket
• Uses a multi-pin electrical connector and bail/shutoff arm
• The ice-maker mold is the component most visibly associated with flaking or corrosion-related replacement decisions

Installation Notes

• Disconnect refrigerator power and the water supply before beginning the repair.
• Remove the ice bucket and gain access to the ice-maker assembly according to the appliance model's service instructions.
• Disconnect the existing wire harness without pulling on the wires.
• Confirm that the replacement connector, fill cup, bail arm, and mounting points match the removed assembly before fastening it.
• Transfer any model-specific mounting bracket or stabilizing hardware only if the replacement instructions for that appliance require it.
• Restore power and water, then verify that the ice maker fills and completes a harvest cycle.

Verified Compatible Models

FFEX2315QM0, FFSS2314QS9A, FFSS2315TS0, FGHS2631PF2, FRS3HR5HW2, FRS3R5EMB8, FRT21IL5DMF, FRT21IS6BW4, FRT24TGCW3, PHT189JKM2, RT155MCD1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.