PERSISTENT WATER LEAKAGE FROM BENEATH OR AROUND THE TUB DURING WASHING OR SPINNING, LOUD RUMBLING, GRINDING, OR BEARING NOISE THAT INCREASES DURING SPIN, EXCESSIVE INNER-DRUM LOOSENESS OR VISIBLE WOBBLE, DRUM RUBBING AGAINST THE OUTER TUB OR CABINET, VISIBLE TUB DAMAGE, CRACKING, OR LEAKAGE AT THE TUB SEAM
Bosch Washer Tank 00245703, Fixes Persistent water leakage from beneath or around the tub during washing or spinning, Loud rumbling, grinding, or bearing noise that increases during spin, Excessive inner-drum looseness or visible wobble, Drum rubbing against the outer tub or cabinet, Visible tub damage, cracking, or leakage at the tub seam
Bosch Washer Tank 00245703. Confirm the complete appliance model number before ordering.
Part 00245703Replaces 243085Bosch
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number00245703
Replaces243085
ManufacturerBosch
Appliance TypeWasher
Part TypeTank
✅ Cross Reference Information
Current Part Number00245703
Verified Previous OEM Numbers243085
Common Symptoms
- Persistent water leakage from beneath or around the tub during washing or spinning, Loud rumbling, grinding, or bearing noise that increases during spin, Excessive inner-drum looseness or visible wobble, Drum rubbing against the outer tub or cabinet, Visible tub damage, cracking, or leakage at the tub seam
Check Before Replacing
- Disconnect electrical power and water supply before inspection.
- With the washer empty and powered off, slowly rotate the drum by hand and listen for grinding, scraping, or rough bearing movement.
- Gently check the inner drum for abnormal up-and-down or front-to-back play; excessive movement can indicate a tub, bearing, or shaft problem, but does not by itself confirm that the complete assembly is defective.
- Inspect for water directly beneath the tub area after a controlled test only if external hoses, door seal, dispenser, and drain components have first been checked.
- Use the washer model and production index to confirm that the existing tub configuration and heater provision correspond to 245703; do not use it for WFMC1001 Classic applications requiring a no-heater-provision tub.
Pro Tip
Bosch specifies that 245703 is the new-translucent-resin complete tub assembly with heater provision. Do not mix old blue-white and new translucent front/rear tub sections, and do not use 245703 on WFMC1001 Classic washers that require the no-heater-provision tub.
Part Details
Part Number00245703
Part TypeTank
ManufacturerBosch
Appliance TypeWasher
Installation Notes
- Verify the exact washer model and production index before installation; Bosch distinguishes 245703 from the no-heater-provision WFMC1001 Classic assembly., Replace the complete tub assembly when required rather than mixing incompatible front and rear tub resin types., Disconnect electrical power and water supplies before beginning service., This is a major internal washer repair involving removal and replacement of the tub-and-drum assembly; follow the model-specific Bosch service documentation or use an authorized servicer., After installation, check for free drum rotation and leaks before returning the washer to normal use.
Verified Compatible Models
Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
