Menu
⚠️ This part (2466300334) has been discontinued by the manufacturer and is no longer available (NLA). OEM stock is exhausted and no direct superseding part number has been issued. Contact us to discuss alternative options.
Washer Door Gasket 2466300334 – Discontinued Part — Contact Us for Alternatives
The 2466300334 front-load washer door boot seal has been discontinued by the original manufacturer and is no longer in production or distribution. This part created a watertight compression seal between the washer tub and the door opening, preventing leaks during wash cycles and inhibiting mold and mildew buildup in the door cavity. When it failed, water leaked from the front of the machine, the door no longer sealed properly, and mold accumulated in the gasket folds. ⚡ Common wear item on front-load washers — now discontinued with no OEM successor part number. Part 2466300334 is listed here for reference and for customers who may have a used unit available — no new OEM stock exists.
🔧 Symptoms This Part Addressed
- Water leaking from the front of the washer during a wash cycle
- Washer door not sealing properly — visible gap between door and tub
- Mold or mildew buildup in the folds of the door boot
- Visible tears, cracks, or holes in the rubber door gasket
- Musty odour from the washer door area
📦 Part Details
- Part Number: 2466300334, 2710540100
- Type: Front-Load Washer Door Boot Seal / Door Gasket — flexible rubber compression seal between tub and door opening
- Status: Discontinued — No Longer Available (NLA). No OEM superseding part number issued.
- Available As: Used units only — when in stock
⚠️ Looking for an Alternative?
If you need a door gasket for your front-load washer and 2466300334 is unavailable, contact our team with your model number. We can identify compatible aftermarket door boot seals that may fit your machine and advise on the best available option.
If you need a door gasket for your front-load washer and 2466300334 is unavailable, contact our team with your model number. We can identify compatible aftermarket door boot seals that may fit your machine and advise on the best available option.
⚙️ Installation Notes
Skill Level: MODERATE — 30–60 minutes. Disconnect power before servicing. Remove the door boot retaining ring (spring clamp) at the front of the tub, peel the old gasket away from the tub lip, and work the new gasket into position starting at the bottom. Reinstall the retaining ring, ensuring the gasket is seated evenly all the way around with no folds or gaps. Run an empty cycle to confirm no leaks before loading laundry.
💡 Pro Tip
Contact Us Before Ordering a Used Unit:
Used door gaskets vary significantly in condition — rubber degrades over time even without visible damage, and a used gasket with micro-cracks will fail quickly under heat and water pressure. If you’re considering a used 2466300334, contact us first so we can assess condition and advise whether an aftermarket alternative would be a more reliable long-term solution for your machine.
Used door gaskets vary significantly in condition — rubber degrades over time even without visible damage, and a used gasket with micro-cracks will fail quickly under heat and water pressure. If you’re considering a used 2466300334, contact us first so we can assess condition and advise whether an aftermarket alternative would be a more reliable long-term solution for your machine.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
