285871 Washer Tub-To-Pump Hose
285871 Washer Tub-To-Pump Hose
285871 Washer Tub-To-Pump Hose
285871 Washer Tub-To-Pump Hose

Whirlpool Washer Tub-to-Pump Hose Kit 285871, Replaces W10116973, 8317915, 8527049, 62731, 3950340, 3951449

XPart Number XP10009155
Sale price
$20.33
Regular price
$21.35
Available by special order
Buying Options: OEM Genuine

Product variant with selected options does not exist!

Frequently Bought Together

Check Fit & Find Parts
Bubba checks verified models, product descriptions, cross-references and store data. Find your model number →
WATER LEAKING FROM BENEATH THE WASHER DURING OPERATION

Whirlpool Washer Tub-to-Pump Hose Kit 285871, Fixes Water leaking from beneath the washer during operation

Genuine Whirlpool washer tub-to-pump hose kit with clamps. It connects the washer tub to the drain pump and carries water from the tub to the pump during draining.

Part 285871Replaces W10116973, 8317915, 8527049, 62731, 3950340, 3951449Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.

Is This the Right Part?

Part Number285871
ReplacesW10116973, 8317915, 8527049, 62731, 3950340, 3951449
ManufacturerWhirlpool
Appliance TypeWasher
Part TypeTub-to-Pump Hose Kit

✅ Cross Reference Information

Current Part Number285871
ReplacesW10116973, 8317915, 8527049, 62731, 3950340, 3951449

Common Symptoms

  • Visible leaking beneath the washer
  • Poor or interrupted draining when the hose is split, torn, kinked, or obstructed
  • Water leakage at a hose connection when a clamp is loose or the hose is not seated correctly

Check Before Replacing

  • Disconnect electrical power before inspection.
  • Check the hose and its connections for visible splits, tears, distortion, or water residue.
  • Verify that both clamps are present and that the hose is seated fully on the tub outlet and pump inlet.
  • Inspect the hose path for obvious kinks or blockage without cutting, stretching, or otherwise modifying the hose.
  • After reassembly, observe a short drain operation for leakage only if the washer can be operated safely and the cabinet has been correctly reinstalled.

Pro Tip

Do not cut off a damaged section or stretch the hose to make it fit; stretching can place strain on the remaining hose and lead to rupture.

Part Details

Part Number285871
Part TypeTub-to-Pump Hose Kit
ManufacturerWhirlpool
Appliance TypeWasher
Primary FunctionConnects the washer tub to the drain pump and carries wash water to the pump during draining.

Installation Notes

  • Unplug the washer and shut off the water supply before service.
  • Expect residual water to spill when the old hose is disconnected.
  • Release the clamps at both ends, then remove the old hose.
  • Position the supplied clamps on the replacement hose before fitting it.
  • Seat one end fully on the pump inlet and the other on the tub outlet, then secure both clamps.
  • Reinstall the cabinet and control-panel components according to the washer model's service procedure before restoring power.

Verified Compatible Models

110.28522700, 1101050299, 10682872600, 11010202000, 11010202001, 11010502990, 11010502991, 11010852990, 11010852991, 11012202100, 11012502100, 11012852100, 11013202200, 11013212200, 11014102300, 11014112300, 11014202300, 11014212200, 11014222300, 11014502300, 11014852300, 11015732400, 11015842400, 11015852400, 11015862400, 11015864400, 11015942400, 11015942401, 11015944400, 11015944401, 11015952400, 11091565810, LSN1000KQ0, LSQ8243HQ0, LSQ8543JQ0, LSQ9010LW0, LSQ9544KQ0, LSQ9549LW0, LSR5233AW0, LSR7233DQ0, LSR7233EQ0, LSR8233EQ0, LSR8233EQ1, LSR8233JQ0, LSR8433KQ0, LXR7144EQ1, LXR9245EQ1, MET3800TW0, MVWC300VW1, TAWS800JQ1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions