Frigidaire Range Bake Igniter 316489400, Replaces 316428500, 316428501, 5304462661, 7316489400 – Superseded by 5304534663

OEM gas-range bake igniter that heats to ignite the gas bake burner.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Igniter does not glow during a bake cycle.
• Igniter glows but the bake burner does not ignite.
• Oven remains cold or takes unusually long to reach temperature.
• Bake temperature is inconsistent because ignition is delayed.

Check Before Replacing

• With the oven cool, disconnected from power, and the gas supply safely shut off, inspect the igniter for cracks, breaks, or obvious heat damage.
• During a bake-cycle observation, only if safe and permitted by the appliance instructions, check whether the igniter glows and whether the burner ignites promptly; stop use if gas accumulates or a strong gas odor is present.
• If qualified to perform electrical testing, verify the igniter circuit according to the model-specific service documentation; do not assume the igniter is defective solely because the oven is not heating.
• Confirm that the bake burner and nearby ignition path are not visibly obstructed by debris before replacing the component.

Pro Tip

Part Details

Key Features

• Genuine Frigidaire OEM bake igniter for gas ranges.
• Flat-style hot-surface igniter assembly with ceramic and metal components.
• Designed to ignite the oven bake burner during the bake cycle.
• Published electrical specification from parts retailers is approximately 3.4–3.6 A.
• Published assembly dimensions are approximately 3-1/2 in. long by 1-3/4 in. wide by 13/16 in. high, with a ceramic block approximately 1-1/2 in. long.

Installation Notes

• Disconnect electrical power and shut off the appliance gas supply before servicing.
• Allow the oven and burner area to cool completely before access or removal.
• Handle the replacement by its ceramic base or bracket; avoid contact with the heating element.
• Install the igniter in the same position and orientation as the original so the ignition path remains aligned with the bake burner.
• Reconnect the wiring exactly as the original was connected and keep wiring away from the burner and hot surfaces.
• After reassembly, restore utilities and verify normal bake ignition; discontinue operation and close the gas supply if ignition is delayed or gas odor persists.

Verified Compatible Models

CEW30GF6GBA, CEW30GF6GBB, CEW30GF6GBC, CEW30GF6GSA, CEW30GF6GSB, CEW30GF6GSC, CEW30GF6GSD, CEW30GF6GWA, CEW30GF6GWB, CGLGFZ86GCD, CRG3480GSSE, CRG3480GWBD, CRG3480ISSB, CRG3480IWWA, CRG3480IWWB, EI30GF55GSA, EI30GF55GSC, EI30GF55GWA, EW3LGF65GBC, EW3LGF65GSD, EW30GF65GSC, EW30GF65GWC, FGF366DCB, FGF366DSA, FGF366ECA, FGF366ECB, FGF366ESB, FGF368GBA, FGF368GQA, FGF368GSA, FGFL67DBJ, FGFL67DCD, FGFL67DCF, FGFL79DSA, FGFL79DSF, FGFL79DSG, FGFL87DCC, FGFL87DCF, FGFLMC55ECA, GLGF386DSF, GLGFS75DBA, PLGF390DCA, PLGF390DCB, PLGFMZ96ECC, PLGFZ390ECA, PLGFZ390ECB, PLGFZ390ECD, PLGFZ390ECE, TGF351ESA, TGF351ESC

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.