Frigidaire / Electrolux Range Dual infinite surface-element switch 318191024, Replaces 318191020, 318191022, 318191028, 903097-9020, 9030979020

Genuine OEM dual infinite switch that controls a range or cooktop surface element, including on/off operation and heat level.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Surface element does not turn on.
• Surface element does not turn off normally.
• Heat level does not regulate and remains high or changes erratically.
• Only one section of the dual-size element operates.
• Dual-burner size selection does not work correctly.

Check Before Replacing

• Turn the range off and allow the cooktop to cool completely before inspection.
• Disconnect electrical power at the range breaker or unplug the appliance before removing panels or handling wiring.
• Verify the control knob is seated correctly and turns the switch shaft without slipping.
• Visually inspect the switch and nearby wiring for burned terminals, melted insulation, loose connectors, or other heat damage.
• With power disconnected, compare the switch’s continuity behavior at the labeled terminals against the appliance wiring diagram or service documentation; do not perform live-voltage testing unless qualified.

Pro Tip

Part Details

Key Features

• Genuine Frigidaire OEM dual infinite surface-element switch.
• Regulates average burner heat through power cycling rather than providing continuous proportional voltage control.
• Supports operation of a dual-size surface element, including inner/outer heating-zone selection.
• Used on selected Frigidaire, Electrolux, Kenmore, and related electric ranges or cooktops when cataloged for the appliance model.

Installation Notes

• Disconnect the appliance from electrical power before opening the control area.
• Allow the cooktop and surrounding components to cool before service.
• Record wire positions and terminal markings before disconnecting the existing switch.
• Transfer wires only according to the appliance wiring diagram and the replacement switch’s terminal markings; do not rely solely on terminal position.
• After installation, reinstall all covers and secure wiring away from hot or moving components before restoring power.

Verified Compatible Models

BES374ES1, BES374ES2, BES374ES3, BES375ES1, BES375ES3, BES384EB1, BES384EC1, BES384ES1, CBES365FS1, E36EC75DSS1, E36EC75DSS2, E36EC75ESS1, E36EC75ESS2, FGES3045KWD, FGES3045KWE

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.