Frigidaire / Electrolux Range Surface Element Switch, Small 318293810, Replaces 318369600, 318220060, 318220000

Genuine OEM small surface-element switch, also described as a range infinite burner switch. Controls a small electric surface heating element.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Small burner does not heat when the control knob is turned on.
• Burner remains on high instead of reducing to lower settings.
• Burner will not turn off when the knob is set to Off.
• Heat output is intermittent or fluctuates abnormally.
• The burner provides only full heat or no heat.

Check Before Replacing

• Allow the cooktop to cool completely, then confirm the issue is limited to the burner controlled by this switch.
• With power disconnected, inspect the switch wiring and terminals for loose, disconnected, or visibly overheated connections.
• Compare the affected control knob’s operation with another burner; loss of heat adjustment can indicate a switch or wiring issue, but the element and power supply should also be considered.
• If electrical testing is performed, disconnect power before accessing components and use the appliance’s model-specific wiring information; live-voltage testing should be performed only by a qualified technician.

Pro Tip

Part Details

Key Features

• Genuine Frigidaire/Electrolux surface-element infinite switch.
• Designed for a small 6-inch electric surface element.
• Rated in one established parts listing for approximately 1,296–1,680 watts, 5.4–7.0 amps, and 240 volts.
• Regulates heat by cycling power to the surface element.
• Also described as a burner control switch or infinite switch.

Installation Notes

• Disconnect electrical power at the range circuit breaker or unplug the appliance before servicing.
• Allow the cooktop and surface elements to cool completely before beginning work.
• Document the original wire locations before disconnecting any terminals, and reconnect wires only according to the appliance’s model-specific wiring information.
• Verify that the replacement switch matches the appliance model and the original switch configuration before installation.
• If wiring, terminal condition, or electrical testing is uncertain, use a qualified appliance technician.

Verified Compatible Models

BEC212ES2, BEC212ES3, BEC317ES2, BES322ES6, BFEF323ES2, BFEF323ES3, BFEF374EB3, BFEF374EB4, BFEF374ES3, BFEF374ES4, CFEF210CS4, CFEF210CS5, CFEF210CS6, CFEF210CS7, CFEF2405LWA

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.