Frigidaire / Electrolux Range Large surface element switch 318293831

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Large surface element remains on or heats continuously when set to a low setting.
• Large surface element temperature is erratic or does not respond normally to the control knob.
• Large surface element produces little or no heat.
• Burner-control operation may be accompanied by a burning smell if switch contacts have overheated.

Check Before Replacing

• Turn all controls off and allow the cooktop and element to cool completely.
• Confirm the problem is limited to the large surface element and that other surface elements operate normally.
• If the range uses removable coil elements, with power disconnected, verify the affected element is seated correctly and compare it with a same-size element if the appliance design permits.
• If the element remains energized with its control set to OFF, stop using the range and have the switch and associated wiring inspected; these symptoms do not by themselves prove the switch is defective.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power by unplugging the range or switching off the circuit breaker before accessing the control switch.
• Allow the appliance and cooktop to cool completely before service.
• Follow the appliance-specific service information for access, wire identification, and terminal placement; wiring and access can vary by model.
• Do not work on or test the switch with power connected.
• Confirm the replacement part number and large-element position against the appliance model before installation.

Verified Compatible Models

CFES355ES5, CFES355ES6, CFES365ES5, CFES365ES6, CFES366FC5, CFES3015LB1, CFES3025LB1, CFES3025LB2, CFES3025LB3, CGLES385FS6, FED300ESE, FED355EBE, FED365EBE, FED365EBF, FES355EBE

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.