Frigidaire / Electrolux Range 6-inch coil surface element 318372210, Replaces 318372200

Genuine OEM 6-inch plug-in coil surface element for electric ranges; 3 turns and 1250 watts. The element supplies heat to a cooking area on the range surface.

Is This the Right Part?

Common Symptoms

• Burner does not heat at all.
• Burner heats intermittently when the element or receptacle connection is disturbed.
• Burner temperature is erratic because the element or its connection may be faulty.
• Visible damage or burned connectors at the element terminals may accompany failure.

Check Before Replacing

• Turn the range off and disconnect electrical power before inspection.
• Confirm the coil is fully seated in the receptacle and that its terminals are aligned correctly.
• With power disconnected, visually inspect the coil and terminals for cracks, distortion, scorching, or corrosion.
• If qualified to perform electrical testing, check the element for continuity with a multimeter; absence of continuity indicates a failed element, but continuity does not rule out a defective switch, receptacle, or wiring.
• If the element works intermittently, inspect the receptacle and terminal connection rather than assuming the coil is the only fault.

Pro Tip

Part Details

Key Features

• Genuine Frigidaire/Electrolux OEM surface element.
• 6-inch diameter.
• Plug-in coil design.
• 3-turn heating coil.
• 1250-watt rating.
• Designed for an electric range or cooktop surface cooking area.

Installation Notes

• Disconnect the range from electrical power or switch off the range circuit breaker before installation.
• Allow the element to cool completely before handling and use appropriate hand protection.
• Remove the old coil by releasing it from the receptacle or retaining arrangement used by the appliance; do not force the terminals.
• Align the new element with the receptacle and drip-bowl opening, then press it fully into place.
• Inspect the receptacle and connectors before installation; replace or repair damaged connections rather than installing the new element into a burned receptacle.
• Verify operation only after the element is correctly seated and power has been safely restored.

Verified Compatible Models

CFEF3005LWE, CFEF3007LBE, CFEF3007LWE, CFEF3007LWF, CFEF3011TSA, CFEF3011TWA, CFEF3012PBA, CFEF3012PBB, CFEF3012PBC, CFEF3012PBD, CFEF3012PBE, CFEF3012PWA, CFEF3012PWB, CFEF3012PWC, CFEF3012PWD

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.