Whirlpool Corporation Refrigerator Water Inlet Valve 4318047, Replaces 628117, 819498, 626083, 047195-08, 978439, 60184-3, 60184-1, 60184-4, 625985, 625926, 625796, 625765, 625734, 61001019, 564640, 564352, 544620, 54461

Genuine Whirlpool refrigerator water inlet valve kit for supplying water to the ice maker and refrigerator water dispenser. Documented kit descriptions include a mounting bracket, hardware, quick-connection water-line fitting, and instruction sheet.

Is This the Right Part?

Common Symptoms

• Ice maker does not fill or produces little ice because water is not admitted.
• Water dispenser flow is weak or absent when the refrigerator has adequate household water supply.
• Water continues entering after the dispense or ice-fill command ends.
• External leakage at the valve, tubing connection, or fitting.

Check Before Replacing

• Confirm the refrigerator water-supply shutoff valve is fully open and the supply tubing is not kinked.
• Check the valve, tubing connections, and quick-connect fitting for visible moisture or leakage; do not operate the appliance if a leak creates an electrical or slip hazard.
• Compare the symptom between the dispenser and ice maker: failure of only one function does not by itself prove the inlet valve is defective.
• Inspect accessible tubing connections for loose seating or damaged tubing before replacing the valve.
• If replacement is performed, restore water slowly and check the valve connection for leaks; avoid overtightening compression connections.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM refrigerator water inlet valve / ice-maker valve.
• Single-ice-maker valve kit.
• Kit documentation includes a mounting bracket, hardware, quick-connection water-line fitting, and instruction sheet.
• Designed to supply water to the refrigerator ice maker and dispenser.
• WhirlpoolParts identifies the component as a genuine replacement part and lists 4318047 as the OEM manufacturer number.

Installation Notes

• Shut off the refrigerator water supply before disconnecting the old valve.
• Use the supplied bracket, hardware, fitting, and instructions where applicable to the refrigerator configuration.
• Seat the water tubing fully in the quick-connect fitting and verify the connection is secure before restoring water.
• Restore the water supply slowly and inspect the valve and connections for leakage.
• Do not overtighten compression connections; tighten only enough to stop leakage.

Verified Compatible Models

ED19MT1LWR0, ED22ZRXXW00, ED22ZRXXW01, RTD1900DAM, RTD2100DAE, RTT1700DAM, RTT1700EAE, RTT1900DAE, RTT1900EAM, RTT2100DAE, SBI20K (P1102509W), SBI20MW (P1120102W W), TLI20K (P7803227W), TZ21Q2W (P1111713W W), W130

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.