Whirlpool Refrigerator Water Inlet Valve 4318047, Replaces 1014, 46000482531, 46000627558

Is This the Right Part?

✅ Cross Reference Information

1014, 46000482531, 46000627558, 46004210524, 53753-1, 55996-1, 55996-3, 55996-5, 625765-REPL, 625793, 625793-REPL, 627007, 627074, 627133, 627143, 627143-REPL, 627173, 627194, 627217, 627223, 627233, 627263, 627277, 627281, 627339, 627341, 627342, 627349, 627362, 627382, 627383, 627384, 627450, 627452, 627453, 627456, 627459, 627460, 627461, 627461-REPL, 627462, 627495, 627497, 627543, 627550, 627558, 627595, 627624, 627661, 627701, 627713, 627752, 627767, 62782-1-REPL, 627820, 627821, 627908, 627910, 627929, 627932, 627935, 627975, 627976, 627978, 69347681, 69362583, 693643, 716328, 819495, 819497, 8214, 831429, 876033, 935, 99989712, A3034201, A3034201-REPL, D3961503, D3961503-REPL, D70368-3, D7036803-REPL, IH2003, IMV-447, IMV460, K-51705, R0175008-REPL, R0175012, R0175015-REPL, R1750-12, R1750-8, Y04719508, Y625765, Y625793, Y627143, Y627453, Y627461

Common Symptoms

• Ice maker does not fill or produces little ice because water is not admitted.
• Water dispenser flow is weak or absent when the refrigerator has adequate household water supply.
• Water continues entering after the dispense or ice-fill command ends.
• External leakage at the valve, tubing connection, or fitting.

Check Before Replacing

• Confirm the refrigerator water-supply shutoff valve is fully open and the supply tubing is not kinked.
• Check the valve, tubing connections, and quick-connect fitting for visible moisture or leakage; do not operate the appliance if a leak creates an electrical or slip hazard.
• Compare the symptom between the dispenser and ice maker: failure of only one function does not by itself prove the inlet valve is defective.
• Inspect accessible tubing connections for loose seating or damaged tubing before replacing the valve.
• If replacement is performed, restore water slowly and check the valve connection for leaks; avoid overtightening compression connections.

Pro Tip

Part Details

Installation Notes

• Shut off the refrigerator water supply before disconnecting the old valve.
• Use the supplied bracket, hardware, fitting, and instructions where applicable to the refrigerator configuration.
• Seat the water tubing fully in the quick-connect fitting and verify the connection is secure before restoring water.
• Restore the water supply slowly and inspect the valve and connections for leakage.
• Do not overtighten compression connections; tighten only enough to stop leakage.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.