Whirlpool Corporation Range Oven burner igniter 4342528, Replaces 8053999, 4389493, 4338008, 4332948, 4322910, 4157446, 3196447, 300259, 337263, 4338037, 4342528VP

Universal round-style oven/broiler gas igniter with a 2.5–3.0 amp range and 10-inch lead. The kit is intended for round-style bake or broil igniter applications and does not replace flat-style igniters.

Is This the Right Part?

Common Symptoms

• Igniter does not glow during a bake or broil call.
• Igniter glows but the burner does not light.
• Oven has little or no heat because the burner does not light.
• Delayed oven-burner ignition.

Check Before Replacing

• Confirm the installed application uses a round-style igniter; this kit is not for flat-style igniters.
• With electrical power disconnected and the range cool, inspect the igniter’s gray ceramic center and its lead/connection for visible damage or looseness; do not touch or stress the fragile igniter element.
• During a normal bake or broil call, observe whether the igniter glows and whether the corresponding burner lights. If gas is smelled without ignition, turn the control off, ventilate, and do not continue attempting operation.
• A qualified technician can use an appropriate clamp meter and appliance-safe live-test procedure to compare igniter current draw with the specified 2.5–3.0 A range; current alone does not establish the diagnosis.

Pro Tip

Part Details

Key Features

• Round-style universal oven/broiler glow-bar igniter.
• Specified operating range: 2.5–3.0 amps.
• 10-inch lead.
• Does not replace flat-style igniters.
• Kit is supplied with an igniter, bracket, ceramic wire nuts, and instructions.

Installation Notes

• Disconnect electrical power and allow the range to cool before accessing the igniter.
• Use the appliance’s model-specific parts diagram or service instructions to confirm the bake versus broil igniter location and connection routing.
• Install only in a round-style igniter application; do not substitute it for a flat-style igniter.
• Avoid touching, bending, or placing stress on the fragile gray ceramic igniter element.
• Use the included high-temperature connection hardware only as directed by the kit and the appliance’s service information.

Verified Compatible Models

278.3528811, 911.3022990, 911.3138890, 911.3528812, 911.3658810, 911.3678853, 911.6128910, 911.7198812, 911.7199181, 911.7199182, 911.7318810, 911.7340191, SF337PEXW0, SS385PEBH0, SS385PEBQ0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.