LG Dryer 4400EL1001D

Is This the Right Part?

Confirm the complete model number before ordering. Similar parts may use different connectors, dimensions, hose positions, electrical ratings, or mounting points.

Part Details

Installation Notes

1. Disconnect power and shut off water or gas where applicable.
2. Photograph wiring, hoses, clamps, and mounting positions.
3. Compare the new part with the original before installation.
4. Inspect nearby wires, hoses, seals, and connectors for damage.
5. Test the appliance and check for leaks, unusual sounds, or error codes.

Use a qualified technician when diagnosis or installation is outside your experience. Gas parts should be installed by a licensed technician.

Verified Compatible Models

DLEC855R, DLEC855W, DLEC885W, DLEC888W, DLHC1455V, DLHC1455W, RC7055AH1Z

Fitment reminder: Match the complete model number, including suffixes and revision digits, before ordering.

The 4400EL1001D is the current OEM LG dryer drive belt, replacing earlier revisions 4400EL1001A, 4400L20E01F, and 4400EL2001C. This belt wraps around the dryer drum and drives rotation via the motor pulley system. When the belt breaks or stretches, the drum stops turning entirely or produces squealing, thumping, and slapping noises. This is a direct OEM replacement for a guaranteed fit and full drum rotation restoration.

The 4400EL1001D is the current OEM belt revision for LG front-load dryers including the DLEC855, DLEC885, DLEC888, DLHC1455, and RC7055 series. Always inspect the idler pulley and drum glides for wear when replacing the belt — a worn pulley will quickly damage a new belt.

Dryer drum not turning or completely stopped. Dryer making squealing or screeching noise during operation. Dryer making thumping or slapping noise. Dryer running but producing no tumbling action. Visible belt fraying, cracking, or breakage inside the dryer cabinet. Drum turning intermittently or slipping.

Genuine OEM LG dryer drive belt — guaranteed fit and performance. Current OEM revision — replaces 4400EL1001A, 4400L20E01F, 4400EL2001C. Compatible with LG DLEC855, DLEC885, DLEC888, DLHC1455, and RC7055 series dryers. Weight: 5 lbs. Country of origin: Canada.

OEM/New (4400EL1001D): The current genuine OEM drive belt sourced directly from LG. Direct drop-in replacement for 4400EL1001A, 4400L20E01F, and 4400EL2001C. Guaranteed fit and full drum rotation performance restoration.

4400EL1001D (OEM current), 4400EL1001A (superseded), 4400L20E01F (superseded), 4400EL2001C (superseded)

Disconnect power to the dryer before beginning any repair. Access the drum belt by removing the front panel and top panel of the LG dryer. Release tension on the idler pulley, slide the old belt off the drum and motor pulley, and remove it. Route the new belt around the drum with the ribbed side facing the drum, loop it around the motor pulley, and re-tension the idler pulley. Rotate the drum by hand to confirm the belt is seated correctly before restoring power. Inspect the idler pulley and drum glides while the belt is off.

Is 4400EL1001D the same as 4400EL1001A? Yes — 4400EL1001D is the current OEM revision that directly replaces 4400EL1001A. LG updated the part number during a belt revision; the new belt is a direct drop-in replacement.

How do I know if my dryer belt is broken? If the drum is not turning but the motor is running, the belt has likely broken. Open the dryer cabinet and visually inspect the belt. See our Dryer Drum Not Turning guide for full diagnosis steps.

Should I replace the idler pulley at the same time? Yes — inspect and replace the idler pulley when replacing the belt. A worn pulley will quickly damage a new belt. Contact us for help identifying the correct idler pulley for your LG model.

Do you ship across Canada? Yes — XPart Supply ships Canada-wide with fast dispatch. Contact us for shipping timelines to your region.