Alliance Laundry Systems Dryer Thermal Fuse Kit 490P3 – Superseded by R9900489

Genuine Alliance Laundry Systems dryer thermal-fuse kit. Alliance parts manuals identify 490P3 as a Thermal Fuse Kit; documented configurations include a thermal fuse assembly and limit thermostat, with associated mounting hardware. The kit is used in dryer heater-duct/heater assemblies.

Is This the Right Part?

Common Symptoms

• No heat
• Insufficient heat
• Dryer stops heating or ends the cycle early
• Dryer will not start when the fuse circuit is open
• Dryer overheating or repeatedly opening the thermal-fuse circuit

Check Before Replacing

• Disconnect electrical power before inspection or testing.
• Visually inspect the heater-duct area, thermal fuse, thermostat, wiring, and terminals for damage, discoloration, or loose connections.
• Using an appropriate meter and the appliance’s service information, check continuity of the thermal fuse with power disconnected; an open fuse indicates it has operated, but does not establish the underlying cause.
• Inspect and clean the dryer venting and lint pathway for restricted airflow, since overheating can cause the safety device to open.
• Verify that the replacement kit matches the appliance model and the existing wiring configuration before installation.

Pro Tip

Part Details

Key Features

• Genuine Alliance Laundry Systems thermal-fuse kit
• Kit includes a thermal-fuse assembly, limit thermostat, jumper wiring, and mounting screws in documented configurations
• Used in the dryer heater-duct/heater assembly
• Provides non-resettable overheat protection through the thermal-fuse safety circuit

Installation Notes

• Disconnect the dryer from electrical power before servicing.
• Replace the thermal fuse and limit thermostat as a kit when the thermal-fuse circuit has opened, following the appliance-specific service information.
• Reconnect wires exactly as documented for the appliance; do not rely on memory or generic wire placement.
• Use the supplied or specified mounting hardware where applicable, and reinstall any removed dryer panels before reconnecting power.
• Installation instructions identify this repair for qualified technicians or similarly experienced persons.

Verified Compatible Models

AE3213, AE3413, AE4113, AE4213, AE4413, AE5113, AE5213, AE5413, AE7133, AE7233, AE9133, AE9233, AE9433, AEE933, AEE953, AEM333, AEM353, AEM433, AEM453, AEM633, AEM653, CE3402L/P1118309WL, CE3402W/P1118308WW, KE5313, KE5513, KE6533, NE2113, NE2113-4350, NE3313, NE3513, NE4313, NE4513, NE4613, NE4713, NE4813, NE5313, NE5313-1760, NE5313-3000, NE5313-3068, NE5313-3069, NE5313-4350, NE5313-4369, NE5313-4562, NE5313-4668, NE5513, NE5513-1760, NE5513-3300, NE6313, NE6333, NE6333-3000

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.