LG Washer Dispenser Inlet Hose 5214ER4001B, Fixes Water leaking from the dispenser inlet hose or its connections
Dispenser inlet hose that carries water from the water inlet valve to the detergent dispenser.
Confirm your full appliance model number before ordering.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Water leaking inside or beneath the washer during filling
- Hose slipping off a connection under water pressure
- Reduced or interrupted water flow to the dispenser when the hose is kinked, cracked, or obstructed
Check Before Replacing
- With the washer unplugged and water supply turned off, visually inspect the hose for cracks, pinholes, kinks, abrasion, or loose connections.
- Check that both hose ends remain fully seated at the water inlet valve and dispenser.
- After inspection and reassembly, restore water and power and observe a fill cycle for leakage; stop the cycle if water leaks.
Pro Tip
Part Details
Installation Notes
- Unplug the washer and turn off the water supply before servicing.
- Access may require removing the washer top panel according to the model-specific service procedure.
- Disconnect the old hose from the inlet valve and dispenser, then seat the replacement hose fully at both connection points.
- Reposition the existing tension clamps or specified retainers securely before reinstalling the panel.
- Restore water and power, then check the first fill cycle for leaks.
Verified Compatible Models
TCW2013QS1, WKEX200HBA, WM1812CW, WM2177HW, WM2301HR, WM2301HS, WM3370HVA, WM3370HVA/01, WM3400CW - ABWEUUS, WM3460CV, WM3600HWA, WM3600HWA - ABWEUUS, WM3600HWA - ABWEVUS, WM3700HVA, WM3770HVA/01, WM3900HBA, WM3998HBA, WM4000HWA, WM4200HWA, WM8100HVA
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
