Frigidaire / Electrolux Range Bake Element 5303051519, Replaces 08002858, 09990061, 3051519, 316075101, K001311298, K001312853, K1311298, K1312852, K1312853, Q000212004

Genuine OEM electric range oven bake element installed at the bottom of the oven. Uses push-on wire terminals; documented specifications include 240 volts, 2,000 watts, approximately 19 1/4 inches wide and 15 inches deep to the mounting plates.

Is This the Right Part?

Common Symptoms

• Bake cycle produces little or no heat
• Oven heats unevenly during baking
• Bake element does not heat or glow
• Visible break, blister, or burn spot on the element

Check Before Replacing

• With the range disconnected from electrical power and fully cool, visually inspect the lower bake element for a break, blister, burn spot, or deformation.
• Confirm that both push-on wire terminals are fully seated and that the wires or terminal ends are not visibly burned or loose.
• If qualified to perform electrical testing, check element continuity with power disconnected; an open circuit indicates a failed element, but continuity alone does not rule out control, wiring, or supply problems.
• Verify the replacement element's dimensions and terminal arrangement against the original element and the appliance model documentation before ordering.

Pro Tip

Part Details

Key Features

• Genuine Frigidaire/Electrolux OEM bake element
• Open-style lower oven heating element
• 240-volt, 2,000-watt specification
• Push-on male spade terminals
• Approximately 19 1/4 inches wide and 15 inches deep to the mounting plates
• Used in electric ranges and some wall ovens

Installation Notes

• Disconnect electrical power before removing or handling the element.
• Allow the oven and element to cool completely before service.
• Before disconnecting the old element, note the wire-terminal positions so the wires can be returned to the corresponding terminals.
• Support the wire leads while transferring them so they do not retract behind the oven liner.
• Confirm that the element is secured at its mounting points and that terminals are fully seated before restoring power.
• Follow the appliance owner's or service manual for model-specific instructions; the exact procedure can vary by appliance.

Verified Compatible Models

33-1027-00-01, CEC1M1WTAB, CEC2M4WSAB, KF200GDW1, KF300GDF3, KF350GDD4, KF350GDH7, KF400GDV2, KF450GDD8, KF460GDW7, KS220GDH2, KS860GDD4, REP305CW2, REP309CV3, RER305CD0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.