BROIL IGNITER GLOWS BUT THE BROIL BURNER WILL NOT LIGHT
Frigidaire / Electrolux Range Broil igniter 5303935067, Fixes Broil igniter glows but the broil burner will not light
Flat-style gas range broil igniter for igniting the oven broil burner. Includes ceramic wire connectors; documented length is approximately 5.53 inches.
Part 5303935067Replaces P205023, 205023, 00205014, 316T023P08, 5308011454Frigidaire / Electrolux
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number5303935067
ReplacesP205023, 205023, 00205014, 316T023P08, 5308011454
ManufacturerFrigidaire / Electrolux
Appliance TypeRange
Part TypeBroil igniter
✅ Cross Reference Information
Current Part Number5303935067
ReplacesP205023, 205023, 00205014, 316T023P08, 5308011454
Common Symptoms
- Broil burner does not ignite or heat.
- Igniter glows for an extended time without a broil flame.
- Igniter does not glow when broil is selected.
Check Before Replacing
- With the appliance assembled and the broil function selected, observe whether the broil igniter glows and whether the burner lights; do not touch hot components.
- If the igniter glows for more than 90 seconds without lighting the gas, it may be too weak to open the safety valve; this observation alone does not rule out other faults.
- With electrical power disconnected, a qualified person can check the igniter for continuity with a multimeter; no continuity supports a failed igniter.
Pro Tip
A visibly glowing igniter is not necessarily good: it must draw enough current to open the gas safety valve. A glow lasting more than 90 seconds without ignition is a useful failure indicator.
Part Details
Part Number5303935067
Part TypeBroil igniter
ManufacturerFrigidaire / Electrolux
Appliance TypeRange
Primary FunctionUses electrical current to heat/glow and open the oven safety valve so gas can ignite at the broil burner.
Installation Notes
- Disconnect electrical power and allow the range to cool before service.
- Verify the appliance model and compare the replacement part with the removed broil igniter before installation.
- This part includes a bracket and ceramic wire connectors; retain and reconnect wiring exactly as configured for the appliance model.
- Do not touch the igniter element with bare fingers or operate the range with wiring unsecured.
- Because this is a gas-appliance ignition circuit, stop and use a qualified technician if wiring, gas odor, or burner-operation conditions are uncertain.
Verified Compatible Models
CGC3S5WSTA, CGC4S7WUTB, GF780HXD0, GF780HXD1, GF780HXF2, GF780HXV1, GF790HXH0, GF790HXV0, GF980HXF0, GF980HXF1, GF980HXH0, GF980HXH2, TGF657BFB1, TGF657BFD1, TGF657BFW1
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
