Frigidaire / Electrolux Range Surface Element Switch Kit 5303935086, Replaces 318120503, 318120504, 3204920, 5300007822, 5300214001, 5301313767, 5301313768, 5301506243, 5303051540, 5303208037, 5303270885, 5303270886, 530

Universal electric range surface-element control switch kit. Controls power to a surface heating element and regulates heat. The kit includes shaft/knob adapters and mounting hardware; the shaft can be adjusted to match the original switch.

Is This the Right Part?

Common Symptoms

• Surface element does not turn on
• Surface element overheats or remains on at the off or low setting
• Surface element heat is inconsistent or cannot be adjusted
• Surface element turns on but does not respond correctly to the control knob

Check Before Replacing

• With power disconnected, inspect the switch wiring and terminals for loose, burnt, or damaged connections.
• Verify the surface element itself before condemning the switch; the manufacturer guidance recommends testing the element first.
• If qualified to perform electrical testing, check the removed switch for continuity according to the appliance service information and switch terminal markings.
• Confirm that the symptom affects the element controlled by this switch and is not caused by the terminal block, receptacle, or element.

Pro Tip

Part Details

Key Features

• Universal/infinite surface-element switch kit
• Five-terminal design for compatible 6-inch and 8-inch surface units
• Adjustable snap-off shaft to match the original switch length
• Includes interchangeable knob/shaft inserts
• Includes mounting hardware
• One kit services one burner switch

Installation Notes

• Disconnect electrical power by unplugging the range or switching off the range circuit breaker before installation.
• Match the replacement switch wiring to the original terminal positions and follow the appliance-specific wiring diagram.
• Select the shaft insert that matches the original control knob and adjust the shaft length to match the original switch.
• Confirm that the replacement switch is compatible with the appliance model and the original switch before installation.
• After installation, restore power and verify that the controlled element responds correctly to off, low, and higher heat settings.

Verified Compatible Models

1196457810, 1196458010, 1196458011, 1196458110, 1196458111, 1196458112, 1196467810, 1196468010, 1196468011, 1196468110, 1196468111, 1196468112, 1196477810, 1196478010, 1196478011

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.