DISHWASHER LEAVES WATER IN THE TUB AFTER THE DRAIN PHASE
Frigidaire / Electrolux Dishwasher Drain pump assembly 5304470276, Replaces 5304461725, Fixes Dishwasher leaves water in the tub after the drain phase
Genuine OEM dishwasher drain pump assembly that removes water from the dishwasher tub during the drain phase.
Part 5304470276Replaces 5304461725Frigidaire / Electrolux
Genuine OEM dishwasher drain pump assembly that removes water from the dishwasher tub during the drain phase.
Is This the Right Part?
Part Number5304470276
Replaces5304461725
ManufacturerFrigidaire / Electrolux
Appliance TypeDishwasher
Part TypeDrain pump assembly
✅ Cross Reference Information
Current Part Number5304470276
Replaces5304461725
Common Symptoms
- Water remains in the dishwasher tub after a cycle.
- Dishwasher makes unusual noise during draining.
- Dishwasher may leak from the pump or motor area.
- Dishwasher may not complete draining; these symptoms can also be caused by blockages, hose problems, wiring, or other components.
Check Before Replacing
- Disconnect electrical power before inspecting the pump or wiring.
- Check the dishwasher filter and sump area for food debris or other visible obstructions.
- Inspect the drain hose for kinks, blockage, or poor connection.
- Visually inspect the pump area for damage, debris, or leakage; do not operate the exposed pump.
- If qualified to perform electrical testing, check pump-motor continuity and verify that the appliance is supplying power during the drain phase; do not assume the pump is defective from symptoms alone.
Pro Tip
Before replacing the pump, check the filter, sump, drain hose, and pump inlet for obstructions because restricted drainage can mimic pump failure.
Part Details
Part Number5304470276
Part TypeDrain pump assembly
ManufacturerFrigidaire / Electrolux
Appliance TypeDishwasher
Primary FunctionRemoves wastewater from the dishwasher tub during the drain phase by pumping it through the drain hose.
Cross References5304461725
Key Features
- Genuine Frigidaire/Electrolux OEM dishwasher drain pump assembly.
- Designed for the drain phase of compatible dishwasher models.
- 120 V, 60 Hz dishwasher pump assembly specification documented by an established U.S. appliance-parts distributor.
- Supersedes manufacturer part number 5304461725.
Installation Notes
- Disconnect electrical power and shut off the dishwasher water supply before installation.
- Wear work gloves when handling the pump and dishwasher components.
- Confirm the appliance model and existing pump connection arrangement before ordering or installing.
- Ensure the drain hose is securely connected and free of kinks after installation.
- Run a fill-and-pump-out test after installation and check for proper drainage and leaks before returning the dishwasher to service.
Verified Compatible Models
58714402400, 58714403400, 58714409400, 58714412400, FDB2410HIB0, FDB2410HIB1, FDB2410HIC0, FDB2410HIC1, FDB2410HIS0, FDB2410HIS1, FMB330RGB0, FMB330RGC0, FMB330RGS0, FMP330RGB0, FMP330RGS0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
