5304505695 Frigidaire 4-Output Spark Module for Ranges and Cooktops, Fixes Surface Burners Not Sparking

🇺🇸 Matching U.S. Part Number: 5304505695

5304505695 is a genuine Electrolux/Frigidaire four-output surface-burner spark module. It replaces multiple discontinued Frigidaire ignition-module numbers including 08067972, 316135701, 316135702, 316T033P01, 5303207522, 5303209028, 5303280394, 7316135701, 7316135702, 8067972 and 31600190001 when fitment is confirmed by the appliance model number.

The module receives signals from the burner ignition switches and generates high-voltage pulses for up to four surface-burner electrodes. A defective module may contribute to multiple burners producing no spark, weak or intermittent sparking, burners clicking without lighting or abnormal continuous clicking after controls are released.

Is This the Right Part?

Confirm the complete appliance model and compare the original module’s output count, terminals and wiring arrangement before ordering. Similar modules may differ in output count, connector type or mounting configuration.

Common Symptoms

• No spark at multiple surface burners
• Weak or intermittent spark at one or more burners
• Burners clicking without lighting
• Spark stopping when another burner is selected
• Continuous clicking after controls are released

Check Before Replacing

• Inspect burner electrodes for cracks or carbon buildup — a damaged electrode can cause clicking without spark at that burner only
• Check for wet or dirty burner components — moisture is the most common cause of continuous clicking and can be resolved by drying the burner area
• Test the burner ignition switches — a failed switch may prevent the module from receiving a signal for that burner
• Inspect ignition wiring, connectors and grounding — a loose or damaged wire can produce the same symptoms as a failed module

Part Details

Installation Notes

1. Disconnect electrical power and shut off the gas supply before servicing the ignition system.
2. Photograph all wiring connections and electrode routing before removal.
3. Compare the new module with the original — confirm output count, terminal positions and mounting before installation.
4. Inspect burner electrodes, wiring harness and connectors for damage during the repair.
5. Restore power and test all burner ignition positions after installation.

Gas-appliance repairs should be completed by a qualified technician where required by local code.

Verified Compatible Models

CGCS389EB1, FGGC3045KBC, FFGC3015LSC

Fitment reminder: Match the complete model number, including suffixes and revision digits, before ordering. Confirm the original module’s output count and wiring arrangement.