Frigidaire Range Spark module, 6 outputs 5304505696

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• One or more gas surface burners fail to ignite.
• Spark is absent at one or more burner electrodes.
• Burner ignition is intermittent, despite the control being operated.

Check Before Replacing

• With the appliance off and the cooktop cool, confirm the affected burner cap is correctly seated on its burner base.
• Disconnect electrical power before inspecting accessible spark electrodes for visible dirt, damage, or poor positioning.
• With power disconnected, inspect accessible ignition-wire connections for looseness or visible damage; do not probe the energized high-voltage spark outputs.
• Because spark switches, moisture, burner-cap position, electrodes, and wiring can cause similar symptoms, rule out those conditions before attributing the fault to the spark module.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the gas supply before accessing the module.
• Access location and mounting details vary by appliance model; the module may be behind a panel, under the cooktop, or in another model-specific location.
• Transfer wiring one connection at a time, or use a photo/labels made before disconnection, to prevent output-lead mix-ups.
• Reassemble all access panels and restore gas and power only after the module is secured and all connections are fully seated.

Verified Compatible Models

79032552411, 79032553411, 79032559411, 79032682411, 79032683411, 79032689411, 79032692411, 79032693411, 79032699411, 79032713411, 79034423511, 79034913511, E36GC76PRS1, ECCG3068AS, ECCG3668AS

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.